How often should you change spark plugs on a car?
Spark plugs are somewhat durable components and don’t need to be replaced too often, that said, the general recommendation is about every 30,000 to 90,000 miles. Each vehicle may differ on when they should be replaced.
Should I change spark plugs after 10 years?
Conventional spark plugs need to be replaced every 30,000-50,000 miles. Long-life (iridium- or platinum-tipped) spark plugs need to be changed between 60,000 and 150,000 miles, depending on the vehicle. Spark plugs may also need to be changed earlier if there is a problem with them.
Does it matter what order you change spark plugs?
Does Spark Plug Wire Order Matter? The spark plug wire order matters a lot. In most cases, the wires are labeled with numbers that will help you match with the right cylinder. To avoid mixing up and placing spark plug wires in the wrong cylinder, it is prudent to replace them one at a time.
How do you know which spark plug each ignition lead goes to?
How to Find Out Which Spark Plug Wire Goes to Which Cylinder
- Obtain the firing order for your vehicle. You can find the firing order in your vehicle’s owner’s manual or in a repair manual for your specific vehicle.
- Find the cylinder numbering.
- Number the terminals on the distributor.
- Route the No.
What happens if you cross spark plug wires?
Every engine manufacturer provides a service manual detailing the correct firing order of their cylinders. When one or more spark plug wires are crossed, the engine may not run, or runs roughly as the timing of fuel/air compression does not align with the delivery of the spark.
What is better iridium or platinum spark plugs?
Iridium is said to be six times harder and eight times stronger than platinum with a 700° higher melting point. Iridium spark plugs have extremely fine electrodes while retaining excellent wear characteristics. Thanks to its strength, iridium spark plugs can last up to 25% longer than comparable platinum spark plugs.
What should I replace my spark plugs with?
For the best results, make sure you replace your car’s spark plugs with components of the same brand. For example, if your car’s spark plugs are made from materials like platinum or double platinum, then you should replace them with the same type of spark plugs just so you’re in compliance with the vehicle manufacturer’s original design.
What kind of spark plugs do cars use?
Some cars, however, feature two spark plugs per cylinder for more precise ignition. Spark plugs are made up of a bunch of small parts that use copper, nickel, iridium, and platinum, among others. For protection and insulation, spark plugs also use ceramic.
How many spark plugs are in a V8 engine?
A household consumer engine typically has as many spark plugs as there are cylinders, so an inline-four has four plugs, and a V8 has eight plugs. Some cars, however, feature two spark plugs per cylinder for more precise ignition. Spark plugs are made up of a bunch of small parts that use copper, nickel, iridium, and platinum, among others.
Where are the spark plugs located on a V6 car?
On an inline 6-cylinder, they are located on the top or side of the engine head. On V6 and V8-cylinder engines, plugs should be separated evenly on each side of the engine. Some cars have engine covers you’ll have to remove to see the spark plug wires, tracing them back to find the plugs themselves.