How often should I tighten my fuel cap?
When tightening your fuel cap, be sure to turn it enough to hear at least three clicks; that ensures the proper torque was applied. If your check engine light is on, simply check your fuel cap to make sure it is turned three clicks. 3. Did you possibly overfill your fuel tank?
How to tell if you have a faulty coil pack?
You need to use ohm meter to test the coil pack for continuity. Make sure you have the approximate ohm values for the coil pack. To find this information, research your car’s engine on the Internet or purchase a Chilton’s or Haynes manual to find out what the mega ohms reading on the coil pack should be. Coil Packs vs. Distributors
When did they start putting coil packs in cars?
Coil packs began to be implemented in many vehicles during the late 1990’s. The biggest reason most manufacturers have turned to coil packs is they are more reliable. Many coil packs don’t require service for up to 120,000 to 150,000 miles.
What is the diagnostic code for engine stall?
Diagnostic trouble codes P0120, P0121, P0122, P0123, and P0124 are what will commonly appear. The engine can stall for no reason and without any warning. This happens when the TPS gives incorrect information to the ECM. The engine can stall at high speed, at low speed, or even at idle.
Where can I download the fuelpak FP3 app?
Download/install the FP3 app through Apple App Store or Google Play Store 2. Plug the FP3 into the motorcycle’s diagnostic port 3. Turn ignition to the “on” position 4. Turn the handlebar run switch to the “on” position 5. Open FP3 app and connect to FP3 Android:Enable Bluetooth and pair to device through app
Is the fuel Pak still in the tool box?
Yes, no codes. I see the word “none” and “noRsp”. Yes it is an 06. Fuel Pak has been removed from the bike. Fuel Pak is sitting on the tool box. Which device gave you the NoRrsp for a reply. Was it the ecm (P family of codes) That is the reason for the part numbers.
Can a fuelpak 3 be installed on a Harley Davidson?
Install a Fuelpak 3 on your Harley-Davidson yourself. Make certain your EFI is properly tuned on your motorcycle for optimum performance. Do it in your garage or on your patio right on the kickstand!
What to do if your fuel Pak is not working?
If you have commo problems to the ECM, you won’t be able to pull the codes even though they are stored in it. You must see the word “None” from EACH device on the buss. My bike for example only has 3 devices it can get error codes from. The Speedo, ECM, & TSSM.