How much torque can a 10mm bolt handle?
Metric Bolts Maximum Torque, in foot-pounds, for clean, dry threads Check your Shop Manual !
| Bolt size | Low Grade | Grade 10.9 |
|---|---|---|
| 6mm | 3-5 | 10 |
| 8mm | 8-12 | 24 |
| 10mm | 15-22 | 47 |
| 12mm | 39 | 83 |
How do you calculate bolt torque?
The widely recognized engineering formula, T= K x D x P (to be explained later in this article), was used to provide the chart’s values, but it must be understood that every bolted joint is unique and the optimum tightening torque should be determined for each application by careful experimentation.
How much weight will a 6mm bolt hold?
With additional consideration for the fatigue strength, and based on the strength class of 12.9 in the table, we select an M6 screw with maximum allowable load of 213 kgf.
How do I know what size bolt I need?
How to Measure the Size of a Bolt
- Step 1: Measure the shank’s diameter.
- Step 2: Determine the thread pitch.
- Step 3: Measure the length of the shank.
- Step 4: Determine the bolt’s grade.
- Step 5: Determine the shape of the bolt’s head.
- Step 6: Measure the length of the threaded portion of the bolt.
Why do you torque bolts?
Torque is used to create tension. Bolts are used to affix two components so that they can resist tensile (pulling apart) and shearing (sliding apart) forces. After the nut has been turned onto the bolt, additional torque causes the nut to turn and stretch the bolt.
What are the torque specifications for a metric bolt?
Metric Bolt Torque. If the bolt diameter is 5 mm, thread series is Coarse, ISO 898-1 Property Class is 8.8, then. Torque for Ecoguard Bolt is 4.0 Nm, Lubricated is 4.6 Nm and dry is 6.2 Nm.
What is a torque screw?
Screw Conveyor Torque. Torque is defined as the twisting force exerted by the drive unit on the conveyor screw. Torque is transmitted through the drive shaft of the drive unit to the screw and converted to force to convey the bulk material.
What is metric torque?
The metric (SI) unit of torque is the newton metre (Nm). In inch units, torque is usually measured as Lb-Ft (pounds feet) or Lb-In (pounds inch).