How much oil does a kx80 take?
3.00 – 5.99 qt. 6.00 – 9.99 qt.
What kind of oil do I put in my KX 85?
Cross Power 4T SAE 5W-40 Synthetic Engine Oil, by Motorex®.
What was the gear ratio of a 1995 Kawasaki KX 80?
The 1995 Kawasaki KX 80 used the following gear ratios: first: 2.538-to-1, second: 1.875-to-1, third: 1.5-to-1, fourth: 1.25-to-1, fifth: 1.09-to-1 and sixth: 0.956-to-1. The primary reduction ratio was 3.4-to-1 and the final reduction ratio measured 3.769-to-1.
What kind of oil does a 1995 Kayaba Kx 80 use?
The front fork oil level, with the spring removed, measured 3.94 inches high and it used recommended Kayaba G5 or S.A.E. 10W20 fork oil; the front fork held 12.71 oz. of oil. The 1995 KX 80 measured 71.26 inches in length, 29.33 inches in width and 41.33 inches in height.
What kind of oil does a KX 80 dirt bike use?
The dirt bike had a 12.258-to-1 top-gear, overall drive ratio. The recommended transmission oil type was SE, SF or SG, class S.A.E. 10W30 or 10W40. The fuel tank capacity held a total of 1.46 gallons, and the transmission oil tank held 0.74 qts., or 700 mL.
What kind of oil does a Kawasaki Z1000 use?
Whether you’re running a 200bhp Ninja ZX-10R on track, commuting on an ER-6F, or bashing out the miles on a Z1000, the right engine oil makes all the difference. Our selector below helps you find the right grade engine oil and where possible we’ve listed Kawasaki’s recommended minimum and maximum levels.
What kind of engine does a Kawasaki KX 80 have?
The bike could carry 1.46 gallons of fuel. The 2000 KX 80 was equipped with an 82 cc, two-stroke, single-cylinder engine with a piston reed valve. The engine had a bore and stroke of 1.89 inches by 1.80 inches, and a 10.3-to-1 compression ratio at low speeds and 9.4-to-1 at high speeds.
The front fork oil level, with the spring removed, measured 3.94 inches high and it used recommended Kayaba G5 or S.A.E. 10W20 fork oil; the front fork held 12.71 oz. of oil. The 1995 KX 80 measured 71.26 inches in length, 29.33 inches in width and 41.33 inches in height.
What was the compression ratio of a 1995 Kx 80?
The 1995 KX 80 engine featured a two-stroke, single-cylinder design. It also sported a piston-valve-reed system and liquid-cooled engine cooling technology. Total piston displacement measured 5.06 cubic inches and the bore by stroke measured 1.89 inches by 1.80 inches. The compression ratio measured 9.4-to-1.
Whether you’re running a 200bhp Ninja ZX-10R on track, commuting on an ER-6F, or bashing out the miles on a Z1000, the right engine oil makes all the difference. Our selector below helps you find the right grade engine oil and where possible we’ve listed Kawasaki’s recommended minimum and maximum levels.