How much oil does a 2008 Toyota Highlander V6 take?
The 2008 Toyota Highlander with the 3.5L V6 engine useS6. 4 quarts of synthetic SAE 0W-20 motor oil.
How much oil does a 2016 Toyota Highlander V6 take?
6.4 quarts (with filter)After refill check oil level.
What kind of oil does a 2008 Toyota Highlander use?
Engine Oil
| Viscosity: | 5W-20 (All TEMPS) Without towing package. 5W-30 (All TEMPS) With towing package. |
|---|---|
| Capacity: | 6.4 quarts. . . (with filter)After refill check oil level. |
| Torque: | 30 ft/lbs (Oil Drain Plug) |
How often should you change oil in 2016 Toyota Highlander?
Toyota recommends getting your 2016 Toyota Highlander oil & filter changed every 3,000-5,000 miles for conventional oil. Synthetic oil usually should be changed every 7,500 – 10,000 miles. Keep in mind it’s best to check your owner’s manual and with your dealer to find out the intervals that work best for your vehicle.
How many quarts of oil does a Toyota Highlander use?
The 2017 Toyota Highlander has multiple engine types, that use different types and amounts of oil. The 2.7 liter inline-4 engine uses up to 4.2 quarts of SAE 0w-20 fully synthetic motor oil. The 3.5 liter v6 engine useS5.8 quarts of 0w-20, and the 4.0 liter v6 engine useS6 quarts of 5w-30 synthetic oil.
How to replace the oil filter on a Toyota Highlander?
Tighten the oil drain bolt in the clockwise direction with the 14mm socket and a 3/8″ drive ratchet to just past hand tight. If you have a torque wrench tighten the drain bolt to about 20 to 25 lb-ft of torque. The next step is to replace the cartridge style oil filter located in the round black plastic housing.
How many quarts of oil does a car need?
Well, that depends on your vehicle’s engine. Many engines will take between five to six quarts, although some small four-cylinder engines may need closer to four quarts. On the other hand, bigger engines can take up to eight or nine quarts.
How to change the drain plug on a Toyota Highlander?
Most people prefer to change the washer during each oil change. The OEM Toyota / Lexus part number for the 14mm oil drain plug crush washer is Toyota 90430-12031. Make sure that the old washer is not still stuck to the oil pan. Wipe away the oil drain hole with a paper towel.