How much oil does a 2003 Subaru Forester take?
4.2 quarts
Capacity: 4.2 quarts (with filter)After refill check oil level.
How do you change the oil on a 2003 Subaru Forester?
Oil & Filter Change Subaru Forester (2003-2005)
- Find Oil Drain – Locate the oil drain plug underneath the vehicle.
- Find Oil Filter – Locate the oil filter.
- Remove Oil Cap – Take off the oil fill cap.
- Replace Cap – Put the oil fill cap back on the engine.
- Car Displayed: 2006 Subaru Forester X 2.5L 4 Cyl.
What kind of oil does a 2003 Subaru Forester take?
The 2003 Subaru Forester came standard with a 2.5L 4Cylinder engine in all models and there was no option for any other motor. The capacity for this engine will be 4.2 US quarts when the filter is included. For oil type You will need to use synthetic blend 5W-30.
How many Litres of oil does a Subaru Forester take?
When equipped with the 2.0-liter 4Cylinder engine, the 2018 Subaru Forester getS5. 1 liters (5.4 quarts) of SAE 5W-30 oil. The 2.5-liter 4Cylinder needs about 4.8 liters (5.1 quarts) of 0W-20. Both of these oil types are synthetic.
What type of oil does Subaru Forester use?
Subaru Oil Guide:
| Model | Subaru Oil Required | Capacity |
|---|---|---|
| Subaru Forester 2002 – 2010 | 5W-30 Conventional Oil | 4.4 Quarts |
| Subaru Forester 2011 – 2021 | 0W-20 Synthetic Oil | 4.4 – 5.5 Quarts |
| Subaru Forester XT 2004 – 2010 | 5W-30 Conventional Oil | 4.4 Quarts |
| Subaru Forester XT 2011 – 2018 | 5W-30 Synthetic Oil | 4.4 – 5.4 Quarts |
Which is the best engine oil for a Subaru Forester?
When choosing an engine oil for your Subaru Forester, we recommend using an engine oil that has the specification API PS, ILSAC GF-6. Advanced fully synthetic engine oil, meets the specifications of API SP, ILSAC GF-6 1. Idemitsu Full Synthetic 0W-20 Engine Oil SN/GF-5
Do you need an oil filter for Subaru synthetic oil?
Does Subaru Synthetic Motor Oil require a special oil filter? No. Subaru Synthetic Motor Oil works with the same Subaru filters used with conventional motor oils. Can I mix Subaru Synthetic Motor Oil with conventional motor oil? In an emergency situation, you can mix the two types of oil.
What kind of oil does a Subarus have?
Most Subarus have the oil type printed on the oil cap – it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn’t printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Forester.
How often should you change the oil on a Subaru?
While the oil is slightly more expensive, in the long run it will save you $$ on non-turbo models because after the first oil change, all subsequent oil changes are every 7,500 miles vs 3,750. What weight of Subaru Synthetic Motor Oil should be used? Subaru offers two different SAE weights that vary in viscosity.