How much oil does a 2002 Harley Davidson Road King take?

How much oil does a 2002 Harley Davidson Road King take?

This is with 4 quarts of oil in it.

Where are the fluids located in a Harley Davidson Road King?

The three most critical fluids used by a 2003 Harley-Davidson Road King are housed within the the motor, primary drive and transmission. These fluids must be drained and refilled regularly – Harley-Davidson recommends 2,500 mile intervals – to ensure that your Road King’s power train components receive their required lubrication.

How much oil does a 02 road King have?

Liter bottles = 1.056 qts. Possibly can accidently add too much. I don’t think it will take 4 quarts. That is it’s capacity when totally empty. On the drain it still has some in it. On my 05 Heritage I change my filter and fill it they pour in the remainder of 3 qts. It’s almost up to the full mark. Click to expand…

Where is the oil drain on a road King?

Place a large drain pan below the Road King’s oil sump, positioned under the motor. Unscrew the oil tank and transmission filler caps from the right side of the Road King. Remove the motor oil drain plug from the side of the oil pan, facing the front of the motorcycle, using an Allen wrench.

How often do you change the lubricant in a Harley Davidson Road King?

These fluids must be drained and refilled regularly – Harley-Davidson recommends 2,500 mile intervals – to ensure that your Road King’s power train components receive their required lubrication. Doing so is straightforward enough for most Road King owners to tackle with little trouble using only a few tools.

The three most critical fluids used by a 2003 Harley-Davidson Road King are housed within the the motor, primary drive and transmission. These fluids must be drained and refilled regularly – Harley-Davidson recommends 2,500 mile intervals – to ensure that your Road King’s power train components receive their required lubrication.

Liter bottles = 1.056 qts. Possibly can accidently add too much. I don’t think it will take 4 quarts. That is it’s capacity when totally empty. On the drain it still has some in it. On my 05 Heritage I change my filter and fill it they pour in the remainder of 3 qts. It’s almost up to the full mark. Click to expand…

Place a large drain pan below the Road King’s oil sump, positioned under the motor. Unscrew the oil tank and transmission filler caps from the right side of the Road King. Remove the motor oil drain plug from the side of the oil pan, facing the front of the motorcycle, using an Allen wrench.

How much fluid does a Harley Davidson have?

Engine = 4 qts. , trans = 28 oz , primary = 32 oz . I’d start with 3.5qts when doing an oil change. If you put in 4 right away you’ll prolly be over filled. Primary and Trans you don’t have to worry about that. Make sure your bike is warm before you change fluids. Makes draining them a lot faster.

How much oil does a 2002 Harley-Davidson Road King take?

How much oil does a 2002 Harley-Davidson Road King take?

This is with 4 quarts of oil in it.

Where is the oil drain plug on a road King?

The tank on your Road King is on the bottom of the transmission. Look underneath the transmission and you’ll see two drain plugs. The plug on left front of the oil pan is the engine oil drain. The plug near the center of the pan is the transmission drain plug. You can’t post conmments that contain an email address.

How much oil does a 02 road King have?

Liter bottles = 1.056 qts. Possibly can accidently add too much. I don’t think it will take 4 quarts. That is it’s capacity when totally empty. On the drain it still has some in it. On my 05 Heritage I change my filter and fill it they pour in the remainder of 3 qts. It’s almost up to the full mark. Click to expand…

How do you change the oil on a Harley Davidson Road King?

Warm the motor up for 3 to 5 minutes, letting it idle in place or by taking the Road King for a short ride. Stop the motor once it has warmed and mount the motorcycle on a service stand to support it in an upright position. Place a large drain pan below the Road King’s oil sump, positioned under the motor.

Where is the oil drain plug on a Harley Davidson?

Look underneath the transmission and you’ll see two drain plugs. The plug on left front of the oil pan is the engine oil drain. The plug near the center of the pan is the transmission drain plug. Good Luck, Steve You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert that has 1 follower.

The tank on your Road King is on the bottom of the transmission. Look underneath the transmission and you’ll see two drain plugs. The plug on left front of the oil pan is the engine oil drain. The plug near the center of the pan is the transmission drain plug. You can’t post conmments that contain an email address.

How to change the oil on a Harley Davidson Road King?

Harley Davidson Road King oil and filter change. You will need 4 quarts of mobile 1, 20-50MC oil and HD oil filter. Tools needed 5/8 socket, and a Harley oil filter wrench. Pan and oil funnel. All the steps from draining oil and filling too checking levels. Loading…

Look underneath the transmission and you’ll see two drain plugs. The plug on left front of the oil pan is the engine oil drain. The plug near the center of the pan is the transmission drain plug. Good Luck, Steve You can’t post conmments that contain an email address. An expert who has achieved level 1. An expert that has 1 follower.

How many quarts of oil do you need for a road King?

Rider Just be careful you are using quart containers and not liter bottles. Liter bottles = 1.056 qts. Possibly can accidently add too much. I don’t think it will take 4 quarts.