How much is a 1990 Harley Davidson Softail worth?
Values
| Excellent | $9,055 |
| Very Good | $5,695 |
| Good | $2,530 |
| Fair | $1,155 |
| Poor | N/A |
How do you change the oil on a 1999 Softail?
Using the oil-filter wrench, remove and discard the old oil filter. Fill the new oil filter with oil and loosely screw it onto the motor by hand. Remove the oil tank filler cap and add up to three quarts of oil into the tank. Replace the filler cap and wipe way any oil spills with a shop towel.
How to change the oil in a Harley Softail?
How to Change the Oil in the Primary Chaincase of a Harley Softail Step 1. Take your Softail for a brief, 10-minute ride. Shift through all five gears, six for newer Softail models, while… Step 2. Place an oil drain pan below the primary chaincase on the left side of the engine. Unscrew the …
What can I use to replace primary oil in a Harley Davidson?
Tips Wipe away any spilled primary fluid with a shop rag before starting your motorcycle. A high-quality Automatic Transmission Fluid can be used as an alternative to Harley-Davidson Formula+ primary fluid, providing that the ATF fluid does not contain friction modifiers that could affect the performance of the clutch.
What to do if you spill oil on a Harley Davidson?
Seal your oil drain pan or pour the old oil into a container, and take it to your local Harley-Davidson repair center for recycling. Wipe away any spilled primary fluid with a shop rag before starting your motorcycle. The fluid will burn as the engine warms to its operating temperature, leaving stain marks on chromed surfaces.
How can I change the oil in my primary chaincase?
Lift the motorcycle into an upright position and hold it in place. Fill the primary chaincase with up to one quart of Harley-Davidson Formula+ Primary Chaincase Fluid. Ideally, the fluid level should be even with the bottom of the clutch assembly, as viewed through the clutch inspection port with the motorcycle in an upright position.
How to do an oil change on a Harley Davidson Softail?
Follow along as Bob teaches you how to drain the fluids on your Harley Softail, including the primary, engine oil and the transmission drain plugs. You’ll also learn how to expertly reinstall the oil filter, and which parts must be replaced each time you perform a Harley Davidson oil change and service your motorcycle.
What should I use to clean my Softail Fork?
Bob teaches you how to remove the necessary caps and screws on the front fork of your Softail or Dyna to drain the fluid and clean the parts. He recommends only using brake cleaner, not carb cleaner.
How to change the oil in a Harley Davidson primary chaincase?
Remove the drain bolt O-ring and wipe the bolt threads and tip with a shop rag. Slip a new O-ring onto the bolt, then coat the O-ring with Harley-Davidson Formula+ Primary Chaincase Fluid. Screw the drain bolt into the primary chaincase by hand.
Seal your oil drain pan or pour the old oil into a container, and take it to your local Harley-Davidson repair center for recycling. Wipe away any spilled primary fluid with a shop rag before starting your motorcycle. The fluid will burn as the engine warms to its operating temperature, leaving stain marks on chromed surfaces.