How much does it cost to replace a drive belt on a Harley-Davidson?
Harley drive belts are very strong and durable and only need replacement after thousands of miles of riding. Unless you have a warranty, a replacement will cost a few hundred dollars at your Harley dealer. Do it yourself in about 30 minutes, for less than $50.
How long does it take to change a drive belt on a Harley-Davidson?
Registered. I do my own work, and on a softail it takes about 4 1/2 to 5 hours to change a belt ( beer break included) if you cheat a little on what you tear down the book on it I have been told is 7 hrs.
How long does a motorcycle belt drive last?
100,000 km
Belt Drive Modern drive belts are strengthened with steel wires inside and Kevlar coating outside – such belt systems can last really long. You can expect a well maintained belt drive on a motorcycle to last in excess of 100,000 km or even more.
Are Harley belt driven?
Since ’92 all Harleys are belt driven but there are still plenty of old chain driven Harleys on the road. My ’82 Ironhead is somewhat young compared to many of the vintage bikes on the road but it’s still running a chain.
How much tension should a Harley belt have?
With the rear wheel on the ground and one rider sitting on the motorcycle, use the BELT TENSION GAUGE (Part No. HD-35381) to apply 10 lbs. (4.5 kg) of force at the midpoint of the bottom belt strand. Belt deflection should be 5/16-3/8 in.
When to replace the rear drive belt on a Harley Davidson?
When it comes to Harley-Davidson maintenance the rear drive belt is a big one. There are many factors other that a belt breaking that might make you change it misalignment or warpage due to incorrect installation of parts. If you plan on going a long distance and your belt is getting old our warn take the time to replace it.
How do you replace a Softail drive belt?
Place the rear wheel onto the frame and replace the axle rod the opposite of the way that you removed it. Pull the rear wheel back until the tension markings on the swing arm line up with the markings on the rear wheel. Replace and tighten the rear wheel nut and lower the bike to the ground.
How to replace twin cam drive belt on Harley Davidson touring?
Position the tensioner first and replace the washer as well as bolt. Make sure that the primary chain is adjusted to the proper tension. Reassemble the clutch basket plates, then replace and torque the reverse threaded bolt as well as the retaining ring (110-115 foot-pounds).
How to replace the drive belt on a Dyna Glide?
Remove the drive belt off of the front and rear sprockets. Discard the belt. Position your new belt onto the front and rear sprockets before re-attaching the shock absorber to the swing arm. Apply Threadlocker (blue) to the lower shock mount bolt before torquing to 30 to 40 ft/lbs. Figure 14. Shock disconnected and swung upwards for belt access.
How do you change a drive belt on a Harley?
Place the new drive belt on the transmission and rear wheel sprocket. Pull the rear wheel back toward the rear end of the Harley to tighten the new drive belt. Replace the rear wheel axle and tighten sightly. Tighten the new drive belt according to the specifications for your Harley model. Reconnect the belt guards.
How long does a Harley Davidson drive belt last?
Harley drive belts are robust and have been known to last upwards of 100,000 miles before replacement becomes necessary. But that sort of mileage is a bit outside the norm, since Harley recommends a regular maintenance interval of 60,000 miles.
Did Harley make a belt drive?
In 1980, technology was brought to the popular Harley-Davidson FX line-up in the form of a rear belt drive on the Shovelhead powered machine. The Super Glide, a combination of the FL engine and frame with a Sportster front end created by Willie G. Davidson, was introduced in 1971 with the “boattail” seat design but was soon made more traditional. In 1980, the newest rendition of the Harley-Davidson Super Glide was the FXB Sturgis; B for belt drive and Sturgis for the South Dakota town