How many watts does a Connex 3300 have?
* The most informative and the one we use.
| GENERAL | |
|---|---|
| Frequency Range | 28.065 to 28.505 MHz |
| Transmitter | |
| Power output | AM/FM, – Selectable 10W/2W |
| AM Peak Power | 40 Watts. |
Can a 10 meter radio talk to a CB?
10 Meter Radios are not designed to communicate with CB Radios. Unlike a CB Radio, you need to have a license to operate a 10 Meter Radio. This means that you can still use a standard CB antenna- just be sure to get an antenna that has a power rating that will handle the power output of your 10 meter radio.
Where are President CB radios made?
Creation of CI-BI RADIO BEL subsidiary in Minsk (Belarus). PRESIDENT ELECTRONICS USA establishes office and warehouse in Naples, Florida.
How does a cx-3300 so two way mobile transceiver work?
Strip the ends of each wire 1/8″ and tin the exposed wire. cx-3300 CX-3300HP So AM/ FM Two way Amateur Mobile Transceiver OWNER’S MANUAL PROCEDURE TO RECEIVE AND TRANSMIT A. MICROPHONE The push-to-talk switch on the microphone controls the receiver and transmitter. Press the switch and the transmitter is activated, release switch to receive.
Do you need a license to use a Connex radio?
Connex radio might though and I cannot control it. Comply with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Further information can be found at the FCC website http://fcc.gov or the ARRL website http://arrl.org. Transmitting using this radio requires an Amateur Radio License.
What is the squelch control on a connex CX-3000?
SQUELCH CONTROL: This knob is used to eliminate background noise being heard through the receiver, which can be disturbing when no transmissions are being heard through the receiver. To use this feature, turn thê knob fully counterclockwise and then turn clockwise slowly until the background noise is just eliminated.
What kind of DC cable does a CB radio use?
DC POWER: This jack accepts the 13.8V DC power cable with built-in fuse. The power cord provided with the radio has a black and red wire. The black goes to negative and red goes to positive. * F.C.: This connector is used for an external frequency counter which indicates the frequency of the selected channel.