How many VLANs can a 2960 switch support?

How many VLANs can a 2960 switch support?

4000 VLANs
For example, the Catalyst 2960 and 3560 Series switches support over 4000 VLANs.

What is the native VLAN on a Cisco Catalyst 2960?

By default, the switch forwards untagged traffic in the native VLAN configured for the port. The native VLAN is VLAN 1 by default. The native VLAN can be assigned any VLAN ID.

How do you create a VLAN on a switch?

First, VLAN support needs to be enabled on the switch if it is not already:

1. Choose Switch configuration.
2. Choose Advanced Features.
3. Choose VLAN Menu…
4. Choose VLAN Support.
5. Set Enable VLANs to Yes if it is not already, and choose a number of VLANs.
6. Restart the switch to apply the changes.

How many VLANs can be created in a switch?

4096 VLANs
A switch supports a maximum of 4096 VLANs, among which VLANs 0 and 4095 are reserved for system use, and VLAN 1 is the default VLAN. Therefore, you can only create VLANs 2 to 4094. You can repeat the vlan command multiple times.

How do I find the VLAN on a Cisco switch?

The show vlans command lists the VLANs currently running in the switch, with VID, VLAN name and VLAN status. Dynamic VLANs appear only if the switch is running with GVRP enabled and one or more ports has dynamically joined an advertised VLAN.

How do you create a VLAN?

Select Switching>VLAN>Basic > VLAN Configuration. Create a static VLAN by specifying a VLAN ID and VLAN name, and, from the VLAN Type menu, selecting Static. Click the Add button. The new VLAN is added to the configuration.

How do I add a VLAN to a switch?

What do I need to know about setting up VLANs?

Choose a valid VLAN number.

Choose a private IP address range for devices on that VLAN to use.

Configure the switch device with either static or dynamic settings. In static configurations,the administrator assigns a VLAN number to each switch port.

Configure routing between VLANs as needed.

What is Cisco Access layer switch?

The access layer, which is the lowest level of the Cisco three tier network model, ensures that packets are delivered to end user devices. This layer is sometimes referred to as the desktop layer, because it focuses on connecting client nodes to the network. Access layer devices include hubs, multi-station access units and switches.

What is trunk port in Cisco switches?

A port on a Cisco switch is either an access port or a trunk port. Access ports belong to a single VLAN and do not provide any identifying marks on the frames that are passed between switches. Access ports also carry traffic that comes from only the VLAN assigned to the port. A trunk port is by default a member of all the VLANs that exist on the switch and carry traffic for all those VLANs between the switches. To distinguish between the traffic flows, a trunk port must mark the frames with