How many gallons of oil does a Cummins ISX take?
Overview:
| Advertised Horsepower | 385-600 HP (287-447 kW) |
|---|---|
| Governed Speed | 2000-2100RPM |
| Clutch Engagement Torque | 1000 LB-FT (1356 Nm) |
| Number of Cylinders | 6 |
| Oil System Capacity | 14 U.S. Gallons (52.9 Litres) |
What does an oil analysis tell you?
The analysis will tell whether the oil has experienced excessive water contamination. The lab may also look at the acid and base numbers. If the acid number is too high or the base is too low, the oil needs to be changed. An oil analysis can also detect a coolant leak within the engine.
What are wear metals?
Wear metals such as copper (Cu) and iron (Fe) may indicate wear in an engine or any oil-wetted compartment. Additive elements such as calcium (Ca), phosphorus (P) and zinc (Zn) are analyzed for depletion which contributes to wear since these elements contribute to certain key lubri- cation characteristics.
How does fluid analysis work with Cummins Engine?
With Cummins Filtration convenient and effective Monitor™ Fluid Analysis program, you can stay advised of your engine system’s filtration efficiency and cleanliness. This helps you catch potential trouble spots and fix them early.
How much oil do you need to test a Cummins Engine?
Successive samples must be taken in the same manner and from the same location. Take the oil sample before adding any new oil to the engine. Always collect the oil in a clean, dry container. Collect a minimum of 118 ml [4-oz] of oil.
What should be the ash content of Cummins engine oil?
Cummins Inc. recommends engine oil with a normal ash content of 0.8 to 1.5 percent mass. Oils with higher ash contents, up to 1.85 percent mass, can be used in areas where the sulfur content of the fuel is over 0.5 percent mass. Limiting ash content is critical to prevention of valve and piston deposit formation.
What is the purpose of a Cummins Service Bulletin?
Service Bulletin Cummins® Engine Oil and Oil Analysis Recommendations Introduction This document outlines the proper application and maintenance of engine oil for engines manufactured by Cummins Inc. The purpose of this Service Bulletin is to update and simplify Cummins Inc. recommendations and guidelines for the end user.