How long does it take to replace a Mercedes Benz radiator?

These instructions should help you replace the radiator on Mercedes-Benz models such as C, S, ML, GL, GLK, GLE, GLS, etc. Replacing the radiator on a Mercedes-Benz is easy and takes about two hours. Below is a list of parts and tools that you will need to change the radiator on most Mercedes-Benz vehicles. Between 3 and 4 gallons.

What should I use to cool my Mercedes radiator?

Mix Anti-freeze coolant and distilled water in a 50-50 ratio. Most Mercedes have the transmission cooler integrated into the radiator. When you disconnect the transmission line, you may lose up to 1 quart of transmission fluid. Allow the engine to cool down. Do not work on a warm or hot engine. Disconnect the negative battery terminal.

Where is the radiator connector on a Mercedes?

It is clipped to the bottom of the top radiator bracket. Locate the electrical connector on the back of the cooling fan. Mercedes E550 Cooling Fan Connector Location – Passenger side, behind the fan. Press the connector and pull it to disconnect it. Remove two U clips at each top corner of the radiator.

Where is the cooling fan on a Mercedes E550?

Mercedes E550 Cooling Fan Connector Location – Passenger side, behind the fan. Press the connector and pull it to disconnect it. Remove two U clips at each top corner of the radiator. These clips can be removed by prying them up with a screwdriver. Slide the radiator colling fan up.

How much water can you put in a Mercedes radiator?

Check capacity in your owner’s manual. Mix Anti-freeze coolant and distilled water in a 50-50 ratio. Most Mercedes have the transmission cooler integrated into the radiator. When you disconnect the transmission line, you may lose up to 1 quart of transmission fluid.

Where can I buy a 1988 Mercedes Benz?

Come in and check this one out in pers 1988 Mercedes-Benz 560SL is finished in Anthracite Gray Metallic over gray upholstery, and power co Gateway Classic Cars of Atlanta is offering this 1988 Mercedes Benz 560SL for sale. This Mercedes h

What does it mean when your radiator fan is not working?

This is what we call a blown fuse. A blown fuse is no big deal, and changing one does not cost a lot of money. If your car’s radiator fan is non-functional, check your car’s user manual and locate the fuse for the radiator fan controller or the fan.

What do I need to replace my Mercedes radiator?

On Mercedes-Benz with 722.6 (5 speed) transmissions, you will need dipstick part number 140589152. On Mercedes-Benz, with 7-speed transmissions, you will need a 722.9 transmission fill adapter. Discharging the air conditioner system may be required on some models.

Is it dangerous to replace a radiator in a car?

Wait until the engine is cold before proceeding. This job can be dangerous, so be extra careful. You will encounter sharp edges and other circumstances that could cause injury. Protect yourself by wearing quality safety gloves and goggles. Be watchful of any moving items while working.

How do you remove a radiator from a car?

Many radiators can be removed by lifting up and out of the vehicle, but some need to be removed from underneath the vehicle. Set the new radiator in place, and then reattach all the previously removed parts. Start with the radiator mounting bolts and finish with the radiator reservoir hose.

How long does it take to replace a radiator?

Replacing a radiator can take most of a day, but, with care and patience, it is is doable. In order to replace a radiator, you’ll need to drain the old radiator, detach any the parts keeping it in place, remove it, install a new radiator, re-install any parts that were removed, and add coolant.

What should I do about my Mercedes-Benz radiator?

Working on your radiator or A/C condenser may involve removing the front bumper. It is easy and simple to do by following these step-by-step instructions. No single part on your Mercedes-Benz gets more work than the door handles. We will show you how to easily service, maintain and replace them.

How to replace a water pump on a Mercedes 190E?

If you do break it you can replace it, but sometimes it is easier just to undo the lower radiator hose. Begin by removing the two rubber hoses on the drivers’ side of the car that go from the water pump to the radiator. Next remove the overflow hose from the top of the thermostat housing.

Where is the drain plug on a Mercedes 190E?

There is an access panel on the lower passenger side of the front bumper. This will allow you to get to the radiator drain plug. Remove the panel by pulling straight out on it. This will give you access to the drain plug. Turn it clockwise to drain the system. This plug can sometimes get corroded and break when turning.

Are there any issues with the Mercedes 190E?

If you are driving a 190E, you already know about the issues with failing rear door locks. You can replace the vacuum solenoid and get those doors opening again in no time by following this article. If you are driving a 190E, you already know about the issues with failing front door locks.

Navigation