How long does it take for the maintenance light to go off?
Typically, this light flashes for six seconds around the 4,500-mile mark interval when you start the vehicle and then disappear. Once your car reaches the 5,000-mile mark interval or more, the light stays on as long as the vehicle is running – this should be treated as a final warning.
How do you reset the maint REQ light?
These are the steps: Turn the ignition switch to the OFF position. Press and hold the SELECT/RESET button. While holding the button down, turn the ignition switch to the ON position (but without cranking or starting the engine). Hold the SELECT/RESET button for about 10 seconds. After 10 seconds, the MAINT REQ’D light will reset and turn off.
How to turn off the maintenance required light on vehicles?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due. Put the key in the ignition. Press and hold the odometer reset knob.
When does the maint REQ’D light go out?
When the mileage driven reaches between 8,000 to 10,000 miles, the MAINT REQ’D light will illuminate for 2 seconds and then blink on and off for 10 seconds then it’ll go out. When the mileage driven exceeds 10,000 miles the MAINT REQ’D light will illuminate and stay on as long as the ignition switch is in the ON position.
How to reset the maintenance required light on a Lexus?
Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.