How does the Kia Sorento emission control system work?

(1) Crankcase emission control system (2) Evaporative emission control system (3) Exhaust emission control system In order to assure the proper function of the emission control systems, it is recommended that you have your vehicle inspected and maintained by an authorized KIA dealer in accordance with the maintenance schedule in this manual.

What are the trouble codes for Kia cars?

Kia Codes; Trouble Code Fault Location Probable Cause; P1000 – P1099 (Fuel and air metering and auxiliary emission control) P1000: System diagnosis incomplete: Drive cycle incomplete, ECM: P1100 – P1199 (Fuel and air metering) P1100: Manifold absolute pressure (MAP) sensor- for EGR system – circuit malfunction: Wiring, MAP sensor: P1102

Are there any mechanical problems with my Kia Sorento?

The sections below go over common Kia Sorento mechanical problems that have popped up since 2011 and what you can do about it. In some cases, selling to CarBrain might be the right choice for you. Drivers with a 2011-2019 Sorentos have complained that the engine may stop working entirely without warning.

How many miles does a Kia Sorento engine last?

Most drivers would hope their vehicle’s engine would last at least 150,000 miles or more. The lawsuit also alleges that the engine poses a fire risk, as it can set on fire without warning as well. If you’re driving a Kia Sorento between the 2011 and 2019 models, you might want to have its engine examined.

What is the misfire code on a Kia Sorento?

Mileage may suffer as well when your Sorento has P0305 as well. P0305 is a cylinder specific misfire code, which means that Cylinder 5 is misfiring and causing it. An important thing to understand when finding the location of Cylinder 5 is that it’s going to be the fifth cylinder in the firing order.

Is there a problem with my 2012 Kia Sorento?

Ask your Kia dealer. CarComplaints.com Notes: As long as catastrophic engine failure at under 60,000 miles is the top owner complaint, it’ll be pretty hard to recommend the 2012 Sorento. No one has added a helpful site for this 2012 Sorento problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code:

Is there a problem with the Kia Sorento p0305?

P0305 is certainly a cause for concern, and should be considered a threat to the drivability your Sorento. The nice thing about P0305 is that it’s a cylinder specific trouble code, which makes diagnosing the problems simpler than P0300, which means that the cylinders are randomly misfiring.

What is the trouble code on a Kia Sorento?

One of the most common trouble codes with the Kia Sorento is the P0455 code. This trouble code references a number that is given to you when you plug your Sorento into a OBDII scanner. P0455 Indicates that there is a large leak in the evaporative emission control system.

Can a Kia Sorento be set for smog check?

Setting the emission monitors by driving your Kia Sorento through a drive cycle might be a bit of a challenge. We highly recommend a smog check repair station or Kia dealership perform the drive cycle on a dynamometer. Kia has designed their drive cycle a bit too complex for the average vehicle owner to perform.

Is the Kia Sorento safe to drive on public roads?

Due to individual driving habits however often performing the drive cycle designed specifically for the Kia Sorento is needed. We must note, the Kia Sorento Drive Cycle is unsafe to perform on public roadways. It requires many starts and stops, and at best, difficult to complete even for an experienced auto repair technician.

When does the Check Engine light on Kia Sorento go on?

Intermittent Check Engine Light: If the check engine light on your 2011 Sorento is intermittent, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds?

What are the problems with the 2011 Kia Sorento?

Worst 2011 Kia Sorento Problems #1: Engine Stopped Working 2011 Sorento Average Cost to Fix: $4,600 #2: Doors Won’t Open From Outside 2011 Sorento Average Cost to Fix: $400 #3: Jerking When Shifting 2011 Sorento Average Cost to Fix: $2,000

Why is my Kia Sorento throwing OBDII code?

The EVAP system captures all fuel vapor from the fuel tank and sends them to the engines intake in order to be ignited in the normal combustion process. When there is a large leak in the Kia Sorento’s EVAP system, it will throw the P0455 OBDII Code.

When does the Kia check engine light turn off?

Kia Check Engine Light (CEL) (also known as Service Engine Soon SES or MIL) should not stay on when you are driving. The Check Engine Light should stay on when you turn the ignition to ON position, and until you start the engine, the light should turn off.

Why does my Kia Sedona have a check engine light?

Kia Check Engine Light (CEL) (also known as Service Engine Soon SES or MIL) may sometimes turn on and stay on when driving. This problem can effect Kia models such as: Sedona and other models.

When does the Check Engine light come on on a Kia Sorento?

Intermittent Check Engine Light: If the check engine light on your 2012 Sorento is intermittent, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue.

What are the emission requirements for a Kia Sorento?

Also make sure the fuel tank is only between 1/4 to 3/4 full. All acceleration and deceleration must be made within 15 seconds, and throttle (gas pedal) application should be smooth at all times. A. Start engine and allow to idle for 5 minutes, in park or neutral. B. Accelerate to 50 mph within 15 seconds and hold that speed for 8 minutes.

Where is the OBD plug on a Kia Sorento?

The video above shows how to locate the on board diagnostics (OBD) plug on your 2012 Sorento, how to read the trouble codes and how to reset or clear the check engine light using a scanner on your Sorento.

What happens when the vent is closed on a Kia?

When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis. Need more information on how to fix the P0447 KIA code?

How does the evaporative emission control system work?

The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere. (The ORVR system is designed to allow the vapors from the fuel tank to be loaded into a canister while refueling at the gas station, preventing the escape of fuel vapors into the atmosphere.) Canister

Navigation