How does a cable shift linkage kit work?
Put the trans in Low gear and the shifter in Low gear, set the swivel so it slides in and out of the correct hole freely. Then move the transmission and shifter to Park (all the way the other way). Rotate the cable swivel until it slips in and out of the hole freely.
How do you install a transmission shift cable?
Install the transmission shift lever so that the squared end is closest to the front of the vehicle. Add the washer and the nut to hold it in place. 12.Take the small nut, two rubber boots, and one large nut and washer off the transmission end of the cable. Insert the cable into the bracket.
How often should I Change my shift cable?
Depending on how often you ride and the conditions, it’s smart to lubricate the insides of shifting brake levers with a light lube about twice a year. While you do this, be sure to get some on the shift cable holder and cable head. Cables rarely break all at once.
What to do if your shift cable breaks?
If the cable broke off flush, you can try fashioning an L-shaped wire to use as a pusher to poke the head out. If you can get it in place on the cable head, you might try to stick a piece of duct tape on the cable and pull and maybe the tape will hold enough to dislodge the cable.
Put the trans in Low gear and the shifter in Low gear, set the swivel so it slides in and out of the correct hole freely. Then move the transmission and shifter to Park (all the way the other way). Rotate the cable swivel until it slips in and out of the hole freely.
How do you change shift cable on bike?
The first step is getting the cable holder inside the lever in the right position. Usually, this requires shifting the lever as if you were shifting onto your smallest rear cog. This will bring the holder into the right position for removing and replacing the cable.
Depending on how often you ride and the conditions, it’s smart to lubricate the insides of shifting brake levers with a light lube about twice a year. While you do this, be sure to get some on the shift cable holder and cable head. Cables rarely break all at once.
How does Dorman auto trans shift cable bushing work?
Designed from high-quality materials for durability, Dorman’s Auto Trans Shift Cable Bushing connects the shift cable to the shift linkage, eliminating play in the shift linkage.