How do you turn the fog lights on a Hyundai Accent?
The fog lights will turn on when fog light switch (1) is turned to ON after the headlights are turned on. To turn off the fog lights, turn the switch to OFF. When in operation, the fog lights consume large amounts of vehicle electrical power.
Why does my Mazda low beam headlamp not work?
Both LOW BEAM HEADLAMPS do not work. The lamps work correctly on the High Beam and Flash (passing) positions. The tail lamps function correctly. 2. Trace in RED the portion of the circuit below that you suspect could be at fault. The LEFT HIGH BEAM HEADLAMP does not work in the High Beam Position.
What should I do if my Hyundai Accent warning light is not working?
1. Drive safely to the side of the road and stop. 2. With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer.
What does it mean when your headlights don’t work?
With that in mind, it can be tremendously useful to start off by looking at whether both, or just one, of your headlights have failed, and whether or not the high or low beam mode still works. When headlights stop working, it’s usually an electrical problem or an physical issue with the bulbs themselves.
What to do if your Hyundai Accent brakes don’t work?
Have the vehicle checked by an authorized HYUNDAI dealer as soon as possible. If the both ABS and brake warning lights are on and stay on, your vehicle’s brake system will not work normally during sudden braking. In this case, avoid high speed driving and abrupt braking. Have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.
1. Drive safely to the side of the road and stop. 2. With the engine off, check the engine oil level. If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, call an authorized HYUNDAI dealer.
Why does one of the headlights on my car not work?
One headlight doesn’t work. This is usually caused by a burned out bulb. High intensity discharge (HID) headlights can also fail due to other associated components. Neither of the headlights work. Bulbs usually don’t burn out together, but it’s still important to rule that out by checking for power.
Have the vehicle checked by an authorized HYUNDAI dealer as soon as possible. If the both ABS and brake warning lights are on and stay on, your vehicle’s brake system will not work normally during sudden braking. In this case, avoid high speed driving and abrupt braking. Have your vehicle checked by an authorized HYUNDAI dealer as soon as possible.
What causes headlights to flash when CTM fails?
When it senses a command for fog lamps it provide ground to the control coil of an externally mounted fog lamp relay located in the power distribution center. When the CTM fails, it can result in flashing headlights or flickering headlights.