How do you turn off the SRS light on a Honda Accord?
Step 1 – Reset the SRS light
- Locate the Memory Erase Signal (MES) plug.
- Disconnect the MES plug from its socket.
- Strip each end of the speaker wires.
- Hold the ends of both wires together, and turn on the ignition.
- Hold the stripped ends of both wires together again.
- Turn off the ignition to start your car as normal.
Is there a way to reset the SRS light?
You can’t rest the airbag SRS light with a simple OBD II scanner which gives you the check engine light codes. You will need a more advanced scan tool to reset the airbag light. For around $110-150, which is how much a diagnosis costs anyway, you can get your airbag reset tool.
What does the SRS light on airbags mean?
The SRS light is a warning light for your supplemental restraint system (airbags). An SRS light means that there is a problem in the system. The first thing I would check is the fuse for the SRS unit.
Where is the SRS light on a Mercedes Benz?
This is located on the lower left side of the control panel on the driver’s side of the car. Find the port that fits the OBD cable and plug the scan tool’s cable into this port. 2. Put the key into the ignition and turn it to the “Run” position. This is the position just before the engine starts.
How does the SRS warning system work in a car?
SRS Warning System. The SRS system checks the operation of several components in your car such as: Airbags. Airbag control unit. Crash sensors. Emergency Tensioning Devices. Belt force limiters. Child occupancy sensor in front passenger seat.
What does trouble code mean on SRS light?
The trouble codes in an SRS light is pretty precise and they do often describe the problem well. SEE NEXT: How to Fix A Broken Seat Belt Buckle? The most common causes of an SRS light is bad connections and plugs. The control units measure the airbags carefully and it does often monitoring it between 2-5 ohms.
Why is the SRS light on my front seat yellow?
A really common case is the connectors under your front seats. The connectors of an airbag system are often yellow. When you are moving the seats forward and backwards the connectors will move a little bit everytime, and it may cause bad connections between the airbag control unit and the airbags/seatbelt airbag and it will cause an error code.
Why does the SRS / airbag light stay on?
Very often the SRS/Airbag light goes on mainly because of a dying battery. But, if the light is on, it will stay on when you install a new battery, until you manually reset it. That is, 2 steps to solve SRS/Airbag light on. Install a new battery; Reset SRS/ Airbag light.
Do you need to reset the SRS light?
You should never just turn off the SRS light. This doesn’t fix any of the problems; it only stops the alert from occurring. The only time you should reset the SRS light is after you repair the initial problems. With an OBDII scanner, you can erase the trouble codes and reset the light.