How do you test a RZR 800 stator?
Set your multimeter to diode test mode, and connect the positive side of your multimeter to the negative side of the battery. Next, connect the negative side of your multimeter to each of the three terminals that would otherwise connect to the stator. Each terminal should give a reading of at least 0.5 volts.
Can a stator overcharge a battery?
(Typically, a bad stator won’t put out excess electricity. One of the windings goes bad and voltage output drops.) This AC voltage goes to the regulator/rectifier where it is changed to DC voltage and the required amount is sent to the battery.
What should the charger voltage be on a Polaris RZR?
There are two types of tests you can run to see if the charging issues lie within the battery. Lift out the driver’s seat, and test the battery’s voltage with the ignition off. A healthy battery will have a minimum of 12-12.5 volts in static conditions.
How does the stator work on a Polaris RZR?
The stator generates the electrical current your Polaris RZR relies on to charge the battery. Electricity is generated as AC voltage, and sent directly to the regulator/rectifier.
Why is the battery on my Polaris not charging?
My battery is not charging, i’ve tried some of the troubleshooting tips including checking the stator,loose connections and bad rectifier. The stator is fine since it will run without battery connected, no loose connections, and three of the four wires on the rectifier had fire (the fourth wire is a ground). Any ideas of what it might be.
Can a Polaris stator run without a battery?
The stator is fine since it will run without battery connected, no loose connections, and three of the four wires on the rectifier had fire (the fourth wire is a ground). Any ideas of what it might be. Thanks for any help. Click to expand… May be a bad battery. I just had my sportsman in because everything went dead. Turned out to be a dead cell.
Why is my Polaris RZR not charging properly?
If the voltage drops or remains the same as it was during the static test, the battery isn’t receiving the correct charge. In that case, it’s time to test the stator.
What should the battery voltage be on a Polaris RZR?
Lift out the driver’s seat, and test the battery’s voltage with the ignition off. A healthy battery will have a minimum of 12-12.5 volts in static conditions. Test the battery’s voltage with the ignition on and the motor running. The battery’s voltage should increase to about 13.5-14 volts with the engine idling.
The stator generates the electrical current your Polaris RZR relies on to charge the battery. Electricity is generated as AC voltage, and sent directly to the regulator/rectifier.
What to do if your Polaris ATV battery is not charging?
need a multi meter , go to battery connections, rev it up a little and see if its charging, sounds like your trying to use a test light.Dont run it without a battery , you will blow all the bulbs and maybe fry other things It’a a 2003 sportsman 500 h.o.