How do you set the ignition on a Harley Davidson?
3. Be sure vacuum hose is properly installed at carburetor and at vacuum-operated electric switch (V.O.E.S.). 4. Start engine. Set engine speed by turning idle adjustment screw clockwise to increase speed or counterclockwise to decrease speed.
How to diag a Harley Davidson Softail 2014?
For 2014 and later models, hold the odometer button down on the lift grip. Move the ignition switch to the ignition position. You’ll see the “DIAG” message displaying.
When to change stator on Harley Davidson Softail?
If the readings are low or zero, switch your meter to reads ohms, shut off the engine, and read the resistance between all five wires. A proper reading is around 0.2 ohms. The reading infinite or “OL” on your meter indicates an open circuit. The stator must be replaced.
What causes no start on Harley Davidson Softail?
A parasitic draw occurs when one or more circuit remains powered after the ignition is turned off. A draw on the battery of more than 0.02 amps can deplete the battery overnight enough to create a no start problem. To test for a parasitic draw, place your multimeter to the amps setting in series with the battery.
For 2014 and later models, hold the odometer button down on the lift grip. Move the ignition switch to the ignition position. You’ll see the “DIAG” message displaying.
If the readings are low or zero, switch your meter to reads ohms, shut off the engine, and read the resistance between all five wires. A proper reading is around 0.2 ohms. The reading infinite or “OL” on your meter indicates an open circuit. The stator must be replaced.
A parasitic draw occurs when one or more circuit remains powered after the ignition is turned off. A draw on the battery of more than 0.02 amps can deplete the battery overnight enough to create a no start problem. To test for a parasitic draw, place your multimeter to the amps setting in series with the battery.
How does a Harley Davidson Softail engine work?
This article applies to the Harley Davidson Softail. To start your Softail’s engine and keep it running, there must be a constant supply of electricity going into and out of the battery.