How do you reset the TPMs on an Infiniti?

Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position. Re‐scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire. position (not ACC). Also make sure all the connections are secure.

How do you reset tire pressure monitoring system?

Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position. Re‐scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire.

Why do I get a spare tire error on my Infiniti?

Error E5 ‐ Spare Tire Error If you receive this error, and you did not upload a sensor ID for the spare, then this vehicle requires a spare. If you did upload a spare, but you received this error, then the vehicle does not store the ID in the ECU for the spare tire. This tutorial is applicable for the following INFINITI Car Model.

How to relearn OBDII on an Infiniti?

Toggle the vehicles selected set to the MAIN set. Then retry OBDII Relearn. Error E5 ‐ Spare Tire Error If you receive this error, and you did not upload a sensor ID for the spare, then this vehicle requires a spare. If you did upload a spare, but you received this error, then the vehicle does not store the ID in the ECU for the spare tire.

What should I do if my TPMS light is not flashing?

STEP 1: Turn the ignition OFF and then ON (engine not running). • If the TPMS warning lamp is illuminated steady (not flashing), the TPMS is operating normally and has detected low tire pressure in one of the tires. Go to STEP 2. NOTE: normal tire pressure maintenance is not covered under warranty.

Are there more than one set of TPMS IDs?

Error E4 – Wrong Set Error Many Lexus vehicles can store more than one set of TPMS ID’s in ECU. Toggle the vehicles selected set to the MAIN set. Then retry OBDII Relearn. Error E5 ‐ Spare Tire Error If you receive this error, and you did not upload a sensor ID for the spare, then this vehicle requires a spare.

Is there a way to reset Nissan TPMS warning light?

(If the light turns off and comes back on before you fill your tires up, that’s normal) This method appears to work for most Nissans and Inifinitis and has been confirmed by others on a ’06 Frontier, ’09 Maxima, ’08 Altima, ’11 G37, ’10 370Z, ect.

When to turn off the low tire pressure warning light?

After tires are inflated to the recommended pressure, the vehicle may need to be driven at speeds above 16 mph to activate the TPMS and turn off the low tire pressure warning light. DO NOT USE CONSULT TO RESET THE TPMS. 2/2 ITB09-050 Title

Why does ECM reset, reprogramming and update?

Although all the hardware problems are fixed, the internal software-driven parameters cannot be changed. For example, ECM reset does not clear the historical faults records. So, these parameters are needed to be cleared, and the reprogramming maybe means that it clears every parameters in ECM.

How do you reset the ECU on a Nissan 350Z?

**a quick reset can be accomplished by disconnecting the negative battery terminal, and depressing the brake a few times. Timing is extremely critical. If it is NOT DONE within the specify time, the ECU will not reset and the Check Engine Light (CEL) will continue to remain ON. 1.

How to reset the engine control module ( ECU )?

The 2 most common ways to reset your car computer is by either unplugging the battery or by resetting the fuse related to the engine control module Will disconnecting battery reset ECU? Disconnect the battery and Switch the ignition key to the on position for about 15 minutes should reset the ECU

Do you need to reprogram a 2015 ECM?

According to the TSB, even 2015 model is needed to be reprogramming. It does not make sense. So, I think that the reprogramming is not the update of new ECM software that fixes the bug. The reprogramming may simply reinstall the same ECU software.

Why is my Nissan ECM reset and reprogramming?

If the reprogramming means the update of new ECM software that fixes a bug, it means that Nissan already knew their ECM software bug before 2013. Then, why did not they fix the bug in 2013-2015 models?

Navigation