How do you reset the tire pressure sensor on a 2010 Kia Optima?
Drive the car at 50 mph for about 10 minutes. Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor.
How do I reset my Kia Optima TPMS?
First, turn the ignition to the “ON” position without starting the vehicle. Now, press the “TPMS Reset” button (which is found beneath the steering wheel) until You see the tire pressure light blink three times and then release the button. Start the vehicle and wait for at least 20 minutes for the sensors to refresh.
Is there a fuse for the TPMS light?
Check the fuses located on the left end of the IP and the ones under the hood. They have fuse ID labels on the covers. All 4 units themselves may have been fried and the system is acting as if you got new tires and replaced your tpms valve stems with standard stems.
Where is the TPMS reset button on a 2010 Kia Optima?
Locate the TPMS reset button. It should be below the steering column. Hold that button down until the light in the instrument cluster blinks three times. Give the system a few minutes to retrieve readings from all four sensors.
How do you reset a Kia TPMS sensor?
Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position. Re-scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.
When does the low tire pressure light turn off?
The low tire pressure light, also know as the TPMS system, on your car should turn off when you have filled your tires to the proper pressure, or “PSI.” Sometimes, it just doesn’t work though.
When to check tire pressure with the TPMS?
While every time you start the car and the pressure light turns on and stays lighted, this means the TPMS is not functioning properly. However, before consulting the mechanic regarding this issue, do check the tire pressure. If the tire pressure is fine, the TPMS needs to be repaired. 2. Extreme Cold Weather
What to do if your TPMS light comes back on?
If you take your vehicle to your dealership or a dealer-recommended repair shop, they will likely be able to fix it in minutes with a scan tool. Sometimes, if the TPMS light comes back on, it may indicate a larger problem. Any of the following may be true: One of the tires may have a slow leak.
Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position. Re-scan each sensor. Drive the vehicle above 30mph for at least 10 minutes and monitor the low tire pressure monitor to ensure it does not blink.
The low tire pressure light, also know as the TPMS system, on your car should turn off when you have filled your tires to the proper pressure, or “PSI.” Sometimes, it just doesn’t work though.
If you take your vehicle to your dealership or a dealer-recommended repair shop, they will likely be able to fix it in minutes with a scan tool. Sometimes, if the TPMS light comes back on, it may indicate a larger problem. Any of the following may be true: One of the tires may have a slow leak.
Where is the TPMS reset switch in the car?
Hold down pressure warning reset switch (located under the steering wheel or in glove box) (insert image of the reset switch) until the TPMS telltale light blinks three (3) times. It will take several minutes for the ECU to receive the signals from the sensors and complete initialization.