How do you reset the oil light on a 2013 Nissan Altima?

How do you reset the oil light on a 2013 Nissan Altima?

2013-2017 Nissan Altima Maintenance Oil and Filter Reset

1. Turn the Ignition On, Don’t start the engine. (
2. Press the SQUARE BUTTON (3) to navigate to SETTINGS.
3. Under SETTINGS MENU select MAINTENANCE then press ENTER.
4. In MAINTENANCE MENU select SERVICE then Press ENTER.
5. Then select RESET.

How do you reset the oil life on a 2013 Nissan Sentra?

First, turn the ignition to the “On” position without starting the engine and then press and hold the double square button until “Settings” appears on Your display.

How many quarts of oil does a 2013 Altima take?

The 2013 Nissan Altima oil type and capacity is 0w-20 and 4.8 quarts.

How do you reset the maintenance light on a 2010 Nissan Altima?

How To Reset Engine Oil Maintenance Light On Nissan Altima

1. Turn the key on but don’t turn the car.
2. Go to the SETTINGS screen.
3. Scroll to the MAINTENANCE.
4. Press the ❏ button.
5. Get into ENGINE OIL.
6. Select RESET.
7. Finally, select the mileage by pressing the ⚈ button once and then press ❏ to reset.

How much oil does a Nissan Sentra 2013 take?

The 2013 Nissan Sentra oil type and capacity iS5w-30 or 5w-20 and 4.2 quarts. Having high quality oil is important for the engine to run smoothly.

How do you reset the oil in a Nissan Altima?

For some model of Nissan Altima select ENGINE OIL. Then press the CIRCLE BUTTON to select RESET then press SQUARE BUTTON to ENTER. Now Press the Circle Button to RESET then Press SQUARE Button to SET. The Reset is Complete when Miles RESET to ZERO (0). You can also RESET the Filter, Tire and Other maintenance in the same procedure.

How to reset oil service light Nissan Maxima?

In the setting mode screen press (circle) button to move to MAINTENANCE. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance. Select RESET and select new time or distance.

How to reset the engine oil light due now?

From the “ Maintenance ” screen, use the arrow buttons to toggle the selection to “ Service “, then press the “ Enter ” button to enter that screen. From the “ Service ” screen, use the arrow buttons to toggle the selection to “ Reset “. Press “ Enter ” to reset the engine oil light.

How to reset oil service light Nissan 350Z?

In the setting mode screen press (circle) button to move to MAINTENANCE. Set a desired interval by pushing (circle) button to highlight ENGINE OIL and pressing (square) button. The reset mode will open up and allow you to enter the desired distance. Select RESET and select new time or distance. Repeat step 3 for ENGINE OIL FILTER.

For some model of Nissan Altima select ENGINE OIL. Then press the CIRCLE BUTTON to select RESET then press SQUARE BUTTON to ENTER. Now Press the Circle Button to RESET then Press SQUARE Button to SET. The Reset is Complete when Miles RESET to ZERO (0). You can also RESET the Filter, Tire and Other maintenance in the same procedure.

How do you do maintenance on a Nissan Altima?

Use the joystick to scroll down to Maintenance and select by pressing ENTER on the joystick *The Vehicle Information Display uses two buttons an ENTER button (looks like two overlapping boxes) and a NEXT button (a single circle/dot)

How do you reset the oil control system?

Press the DOWN ARROW to scroll to MAINTENANCE then press OK BUTTON. Under MAINTENANCE MENU select OIL CONTROL SYSTEM then press ENTER. Then Press OK BUTTON to RESET. Select YES then press OK Button to confirm. You can also reset the OIL and FILTER , TIRE and OTHER MAINTENANCE in the same procedure. After Resetting the maintenance.

How to reset engine oil and filter light in seconds?

Highlight Engine Oil using the joystick and then press ENTER to select. Highlight Reset using the joystick and then press ENTER to reset. Make sure that the mileage displayed reads 0. Repeat steps 3-5 for Tire Rotation if the tires were rotated.