How do you reset the maintenance required light on a Toyota Sequoia?
Turn your ignition key to the ‘ACC’ or ‘LOCK’ position. Press and hold the trip meter reset nob (next to your Toyota Sequoia’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Sequoia. Hold the meter reset until the MAINT REQD light switches off.
How do you reset the maintenance required light on a 2005 Toyota Sequoia?
2005-2007
- With vehicle ignition switched to ON position, make sure odometer reading is shown, then turn the ignition switch to OFF position.
- While holding reset button, switch ignition to ON position.
- Continue to hold the reset button until the odometer displays “000000” and/or the MAINT REQD light goes off.
How to reset the Toyota maintenance required light?
Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.
How to turn off the maintenance required light?
The maintenance required light should begin flashing on your dashboard. Continue to keep the button pressed until the light goes away from your dashboard. Pressing the reset button for more than 20 seconds is necessary for this technique to be successful.
Why does my Toyota maintenance light keep flashing?
The Toyota maintenance light relies entirely on the odometer counting those 5,000 miles, so it has no way of detecting if you changed the oil in the meantime. That’s why this light can become annoying if you just changed your oil and it flashes on your dashboard reminding you to do it.
Why do I need to change the oil in my Toyota?
Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk. It will also reduce wear and tear on components, so you end up saving a lot of money in the future.