How do you reset the airbag light on a Nissan Altima?
How to Reset The Airbag Status Light On A Nissan
- Insert the key into the ignition and turn the key to ON.
- Notice that the light will stay on and then start blinking.
- Wait 5 seconds.
- Wait 5 seconds and repeat step 1.
- When you are complete, you should have inserted the key and removed it for a total of 6 times.
Where are the airbag sensors located in a car?
Certain designs would have an airbag sensor inside the engine while in others it can be anywhere in the area where the passenger seat is present. For some vehicles, the airbag sensors may be located throughout the vehicle. They are also commonly found behind the front fender in the front of the vehicle.
Why does the airbag light come on on an Altima?
Your airbag light is part of your Altima’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.
What does the diagnostic warning light on Nissan Altima mean?
Every time you start your Nissan Altima, the computer system runs a self diagnostic check on all major systems. If any of these checks fail, you will see a diagnostic warning light on the dash for the corresponding system. When the airbag system fails this check, you’ll see the airbag light.
Where is the SRS airbag control module located?
In most GM cars it is under the driver or passenger seat. Disconnect the positive battery cable and wait 3 min. You are now safe to unplug the airbag control module harness wiring plugs. All airbag srs components must be installed and connected properly before installing the airbag control module.
Certain designs would have an airbag sensor inside the engine while in others it can be anywhere in the area where the passenger seat is present. For some vehicles, the airbag sensors may be located throughout the vehicle. They are also commonly found behind the front fender in the front of the vehicle.
Your airbag light is part of your Altima’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.
How to contact Nissan air bag module reset?
Call us at 888-779-9029 M-F 9-5 EST Frontal collision detected. Driver and/or front passenger air bag modules are deployed Side collision detected. Curtain air module and seat belt pre-tensioner are deployed Seat belt buckle switch LH circuit is shorted to ground.
How do you install an airbag control module?
All airbag srs components must be installed and connected properly before installing the airbag control module. This includes air bags, seat belts, clock spring and impact sensors. Disconnect the battery and bolt down the module and then connect the harness wiring plugs.