How do you reset low tire notification?
Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes to reset the sensor. You’ll usually find the tire pressure monitor reset button beneath the steering wheel.
How do you reset the tire pressure sensor on a 2010 GMC Sierra?
With DIC Button
- Press and hold the ✓ button until the horn sounds twice.
- Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire’s air pressure until a horn chirp sounds.
- A horn chirp will confirm that the sensor has been reset.
How to reset TPMs on a Volvo Car?
1. Use a tire pressure gauge to check the inflation pressure of all four tires. 2. Re-inflate the tire (s) to the correct pressure (consult the tire pressure placard or the pressure tableof the owner’s manual). 3. Drive the car for at least one minute at a speed of 20 mph (30 km/h) or faster.
How do you check tire pressure on Volvo?
Use Volvo tool #(NNN) NNN-NNNN which allows the technician to both check the tire pressure and confirm the function of the TPMS sensor. The pressures must be set in accordance with the Tire Pressure Label on the vehicle.
How do I reset the tire pressure message?
Start the procedure by using the Volvo tool #(NNN) NNN-NNNNto check each TPMS sensor. For each of the four sensors, write down the tire location (LF, RF, LR, RR), sensor ID # (“Dec” for Schrader, “Hex” for Siemens), and tire pressure. When connecting the vehicle to VIDA, note down the TPMS related DTC.
How does low pressure warning work on Volvo?
The warning for low pressure remains in the Driver information module (DIM) until the Central electronic module (CEM) has identified the new sensor. Programming “by hand”. This is carried out using the appropriate Volvo tire sensor activation tool, or Low Frequency (LF) initiator (sensor activation tool).