How do you reset a TPMS sensor?
With the vehicle off, turn the key to the “on” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The TPMS reset button is usually located beneath the steering wheel.
Do I need to replace TPMS When replacing tires?
Most tire shops and repair shops recommend servicing the TPMS after changing or installing new tires or wheels by replacing the valve core, retaining nut, seal and cap on the valve stem, then testing the system to make sure it’s operating correctly. Many direct systems can display the actual pressure in each tire.
Why does the TPMS light come on when your tire pressure is low?
When the compression effect occurs, and the tire pressure is reduced, the TPMS naturally believes that you have low tire pressure. That is why it will activate the TPMS light under these circumstances. You may have a bad tire pressure sensor.
Can a TPMS sensor be confused with a spare tire?
Also, if anyone nearby is adjusting tire pressures on a car with TPMS sensors, the system may be confused. If your vehicle’s TPMS includes the spare, burrow into the trunk and get access to the spare first. Don’t forget to top off the tires to the correct pressure. 1. The definitive correct tire pressure is on this sticker on the door frame.
Where is the Indirect TPMS located on a car?
The indirect TPMS is used more often in Europe. The sensors are located within the ABS braking system and/or the speed sensors of each wheel. They monitor the speed of the rotations of the wheels for any change since underinflated tires are smaller and rotate faster.
What to do if your TPMS warning light is still on?
If you’ve checked all your tires (including the spare) and the tire warning light is still illuminated, reset your tire pressure monitoring systems. Some models require the TPMS to be reset every time pressure is added. Instructions for how to reset your tire warning light vary from model to model.