How do you reset a Nissan Versa hazard indicator?
Apply the parking brake and place the shift lever into the P (Park) position. Place the ignition switch to the ON position. Do not start the engine. Add air to the tire. After a few seconds, the hazard indicators will start flashing.
What does the malfunction warning light on a Nissan mean?
Malfunction Warning light: Malfunction symbol light indicates for two reason, one is fuel filter cap isn’t attached second emission system problem.
How does the wrench symbol work on a Nissan Versa?
The wrench symbol light will turn on for about 5 seconds, then turn off. Press the “TRIP’ button and hold for 3 seconds during the time the wrench symbol is illuminated. The symbol and distance display will begin to flash and will show the current interval.
What does TPMs on Nissan Versa tell you?
As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.
What should I know about the Nissan Versa?
2020 Nissan Versa Sedan Owner’s Manual and Maintenance Information 2020 VERSA OWNER’S MANUAL and MAINTENANCE INFORMATION For your safety, read carefully and keep in this vehicle. CALIFORNIA PROPOSITION 65 WARNING
Malfunction Warning light: Malfunction symbol light indicates for two reason, one is fuel filter cap isn’t attached second emission system problem.
Is there a lemon law for Nissan Versa?
Additionally, a separate Customer Care/Lemon Law Booklet(U.S.only)willexplainhowtore- solveanyconcernsyoumayhavewith yourvehicle,andclarifyyourrightsun- deryourstate’slemonlaw. A NISSAN dealership knows your vehicle best.Whenyourequireanyserviceorhave any questions, they will be glad to assist youwiththeextensiveresourcesavailable tothem.
When do Nissan AEB malfunctions become dangerous?
The plaintiff says the AEB malfunctions are especially dangerous when the vehicles suddenly brake in parking garages, while traveling through intersections and over railroad tracks and bridges. Nissan’s motion to dismiss the case was denied in late 2020.
How to do idle and volume relearn in Nissan?
Turn the ignition switch on without starting the engine for at least 2 seconds. Turn the ignition switch off for at least 10 seconds. Again, turn the ignition on for at least 2 seconds. Turn the ignition off for at least 10 seconds. This action will inform the computer on the new release position of the accelerator pedal and the closed position.
How to reset the maintenance required light on a Nissan Versa?
Nissan Versa Maintenance Required Light Reset Procedure for All Years: 2012-2015. Place the ignition in the ON position. Push the trip computer mode switch “A” for 3 seconds while the wrench symbol and maintenance information are displayed. The symbol and distance display will start to flash and the display will show the current interval.
How do you change interval on Nissan Versa?
The symbol and distance display will start to flash and the display will show the current interval Push the switch “A” to increase the interval distance (each step increases the interval distance by 500 miles) If no further action is made, the display returns to the previous mode and the new interval is set
What should the idle speed be on a Nissan Versa?
The idle for the Nissan Versa should be between 650-750 RPM at park or in neutral. The official procedure can be found here; however, I found that this procedure is very time sensitive and it was much easier to perform it the following way. 1. Drive Versa for 10 minutes to warm up the engine and transmission.
Apply the parking brake and place the shift lever into the P (Park) position. Place the ignition switch to the ON position. Do not start the engine. Add air to the tire. After a few seconds, the hazard indicators will start flashing.
Turn the ignition switch on without starting the engine for at least 2 seconds. Turn the ignition switch off for at least 10 seconds. Again, turn the ignition on for at least 2 seconds. Turn the ignition off for at least 10 seconds. This action will inform the computer on the new release position of the accelerator pedal and the closed position.
How to increase air volume in Nissan Versa?
1. Drive Versa for 10 minutes to warm up the engine and transmission. 2. Turn off Air Conditioning, Headlamps and Rear Window Defogger. 3. Put Versa in park, straighten out steering wheel (neutral position) and turn off vehicle.