How do you replace brake pads on a Mercury?
Lower the front tires to the ground and tighten the lugs with the lug wrench. Place the jack beneath the frame in the back of the Mercury and lift the rear-end of the SUV. Place jack stands beneath the rear axles and replace the rear brake pads as you did the front. Replace the rear wheels onto the wheel bolts,…
How often do you need to replace disc brakes on a Ford mountaineer?
The 2002 and 2003 Mountaineers come equipped with four-wheel disc brakes. Ford recommends replacing the brake pads every 35,000 to 50,000 miles. The pads are designed with built-on wear indicators that scrape against the brake rotors once the pads have reached a certain level of wear.
How do you replace brake pads on a mountaineer?
Place jack stands beneath the rear axles and replace the rear brake pads as you did the front. Replace the rear wheels onto the wheel bolts, screw on the lug nuts, lift the vehicle to remove the jack stands, and lower the back tires of the Mountaineer to the ground.
What kind of brake fluid do you use in a Mercury Mountaineer?
Lift the master cylinder cap from the reservoir opening and place a clean funnel inside. Pour brake fluid into the container until the fluid level reaches the full line. Remove the funnel and replace the master cylinder cap. Close the Mercury’s hood. The Ford Motor Company recommends using DOT-3 brake fluid in the Mountaineer.
Lower the front tires to the ground and tighten the lugs with the lug wrench. Place the jack beneath the frame in the back of the Mercury and lift the rear-end of the SUV. Place jack stands beneath the rear axles and replace the rear brake pads as you did the front. Replace the rear wheels onto the wheel bolts,…
The 2002 and 2003 Mountaineers come equipped with four-wheel disc brakes. Ford recommends replacing the brake pads every 35,000 to 50,000 miles. The pads are designed with built-on wear indicators that scrape against the brake rotors once the pads have reached a certain level of wear.
Place jack stands beneath the rear axles and replace the rear brake pads as you did the front. Replace the rear wheels onto the wheel bolts, screw on the lug nuts, lift the vehicle to remove the jack stands, and lower the back tires of the Mountaineer to the ground.
Lift the master cylinder cap from the reservoir opening and place a clean funnel inside. Pour brake fluid into the container until the fluid level reaches the full line. Remove the funnel and replace the master cylinder cap. Close the Mercury’s hood. The Ford Motor Company recommends using DOT-3 brake fluid in the Mountaineer.
Where is the Jack on a Mercury SUV?
Place the jack beneath the frame in the back of the Mercury and lift the rear-end of the SUV. Place jack stands beneath the rear axles and replace the rear brake pads as you did the front.
Where is the master cylinder on a Mercury?
The master cylinder is located to the right of the Mercury’s engine, near the firewall that separates the engine bay from the inside of the vehicle. Use a syringe or turkey baster to remove the fluid from the container. Lay the master cylinder cap loosely over the container.
Place the jack beneath the frame in the back of the Mercury and lift the rear-end of the SUV. Place jack stands beneath the rear axles and replace the rear brake pads as you did the front.
The master cylinder is located to the right of the Mercury’s engine, near the firewall that separates the engine bay from the inside of the vehicle. Use a syringe or turkey baster to remove the fluid from the container. Lay the master cylinder cap loosely over the container.