How do you replace a rear tail light assembly on a 2008 Ford?
The lamp should be pulled straight and rearward to remove. Remove the 2 screws and the rear lamp assembly. Disconnect the electrical connectors. To install, reverse the removal procedure. An audible click should be heard when the rear lamp assembly is fully seated to the quarter panel. lostrider, Ford Technician Category: Ford
How do you remove tail light from car?
If necessary, remove the rear bumper cover or interior trim panel by unscrewing and/or detaching the clips. Once you have direct access to the tail light assembly, remove the bolts or screws holding it in place. Pull the tail light assembly out and away from the vehicle.
Do you have to remove rear bumper to replace tail light?
Regardless of why you want to replace your tail light assembly, generally, the procedure is pretty straightforward. On some vehicles, however, the rear bumper cover or interior trim panel must be removed to access the tail light fasteners—and that can make the job more complicated.
How long does it take to replace tail light assembly?
Replacing your taillight assembly is a super simple task. It can be done in a matter of 15 minutes and save you that hour labor charge at the shop. Whether your upgrading to aftermarket tail lights or just replacing a broken or cracked OEM assembly, we recommend doing it yourself if you have the tools.
When to change tail lights on Ford F-350?
Burn out tail lights are a common reason for a police officer to pull you over, so we recommend changing all of the tail lights on your F-350 Super Duty whenever one is burnt out. When changing the tailight bulb on your F-350 Super Duty, be careful not to touch the glass part of the new bulb as this will cause the tailight bulb to burn out quicker.
How do you replace a tail light assembly?
If the assembly doesn’t fall out, pull on it with the pressure distributed easily and it will pop out (be cautious not to pull too hard where you fall back and rip the wires out). Remove the bulbs. If using new bulbs, unclip the wiring harness from the bulb’s base and leave the old ones in the old assembly.
What to do if your tail light falls out?
Remove the two bolts while supporting the taillight assembly in case it falls out. If the assembly doesn’t fall out, pull on it with the pressure distributed easily and it will pop out (be cautious not to pull too hard where you fall back and rip the wires out). Remove the bulbs.
Can a Ford F-350 Super Duty brake light burn out?
It is possible for the turn signal or brake light to work but the tailight part to be burnt out – replacing the bulb on your F-350 Super Duty will restore functionality to both. Since the tailights are on whenever your parking lights or headlights are on, they will burn out eventually.