How do you replace a belt on a Honda Accord?

Be sure that when replacing the old belt with a new one, you follow the same pulley sequence, which should be shown on a sticker under the hood or in your maintenance manual. If you purchased an OEM replacement belt or any other belt for that matter, the reverse side of the package may also have the diagram.

What kind of timing belt does a Honda Accord have?

Luckily, there’s a handy guide. If your Honda Accord dates back to 1997-2002, it has a timing belt. If you have a 4-cylinder model from 2003-2007, you engine has a timing chain; if you have the V6 model from those years, it’s a timing belt.

Where does the belt go on a Honda?

Honda generally includes a belt routing diagram somewhere under the hood, showing where the belt goes around various pulleys. Rotate the tensioner again to allow the belt to be installed on all pulleys, then slowly release it to regain tension. Run the engine and observe the belt for proper functioning.

What happens if the serpentine belt on a Honda Accord breaks?

As this belt drives the A/C compressor, alternator, power steering pump, and water pump, it is not something to take lightly. If you hear it squealing, see it deteriorating, or having issues with it, get it changed as soon as possible. If it breaks, the water pump stops and the engine will quickly overheat, leaving you stranded on the road.

When to change the timing belt on a Honda Accord?

When should I change my timing belt on a Honda Accord? The timing belt on a Honda Accord generally needs to be replaced about every 60,000-100,000 miles. When it’s time to replace your timing belt, it’s a good idea to ask your mechanic to check the water pump, timing belt, and pulleys all at the same time.

What kind of wrench do I need to remove belt on Honda Accord?

A serpentine belt wrench is definitely optimal here, but a very long handled 12 mm open ended box wrench will work as well. You may need a second person for this part of the job. Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2.

How do you remove serpentine belt on Honda Accord?

Put the wrench on the nut in the center of the pulley, and crank back on it clockwise with a significant amount of force. This will loosen the belt for removal. Figure 2. Put the wrench right on the center nut and pull clockwise. While maintaining clockwise pressure on the pulley wrench, slide the worn belt off the pulleys.

Why does my Honda Accord not turn over?

Listen for common signs like a ticking noise from the engine, or even an engine misfire. The timing belt can also cause your engine to simply not turn over if it has broken. Oil leaks can also be a sign, since engines typically start to leak motor oil from the timing belt cover over time.

Why does the serpentine belt on my Honda Accord crack?

It’s most likely the serpentine belt. If your serpentine belt is old, stretched, cracked and squealing, it is due for a replacement! Follow this picture guide to quickly and easily change the serpentine belt (also called ‘drive belt’) in your Accord! What does a serpentine belt do?

How to set Honda Accord alternator and power steering belt?

The tension has to be set with a bolt on the alternator and power steering pump respectively. I personally set the belt by feel if a firm push with 1 finger yields about 1/2″ of deflection at the center of the belt between two pulleys you’re good. But you can also purchase a belt tension gauge if you wish. http://creativecommons.org/licenses/b…

How do you set the power steering belt?

The belts on these vehicles don’t have automatic tensioners like the newer vehicles do. The tension has to be set with a bolt on the alternator and power steering pump respectively. I personally set the belt by feel if a firm push with 1 finger yields about 1/2″ of deflection at the center of the belt between two pulleys you’re good.

How often should the timing belt be replaced on a Honda Accord?

As per Honda, your timing belt needs to be serviced every 50,000 to 80,000 miles. While you’re in there, there are a few other important things to address like the timing balancer and the water pump. This article will guide you through the process of replacing the timing belt, timing balancer, and the water pump on your Accord.

Can A P / s bolt be removed from a Honda Accord?

Figure 3. P/S bolt and tensioner. The power steering pump can be removed from its bracket to gain more room. The hoses do not need to come off. The alternator as well as its related belt will need to come off in order to gain more clearance to the timing belt and water pump.

What should I do if my Honda Accord is hot?

If your car is hot, do not remove your radiator cap. You are in danger of burning yourself, so wait for the car to cool down. On the front and back of the air intake box there are 10mm screws. Remove both of these screws. You will probably need the extension for the socket wrench.

Do you need to replace the thermostat on a Honda Accord?

Thermostats are an important part of your car’s cooling system. This guide will go over how to successfully replace a thermostat on your Honda Accord before you blow the engine.

How many gallons of coolant should I take out of my Honda Accord?

Around two gallons should drain out. If your coolant flow seems slow, remove the radiator cap and coolant reservoir cap to speed up the process. Also, consider gently squeezing any radiator hoses that you can reach to coax any residual stuck coolant out.

When to replace the tail light assembly on a Honda Accord?

This article applies to the Honda Accord (1990-2002). Replacing your tail light assembly is a very simple procedure and can save you from an expensive and unnecessary trip to the auto shop. Properly functioning tail lights ensure safe driving on highways and help to avoid rear-end collisions and tickets.

Can you replace front and rear shocks on a Honda Accord?

Diagram of rear suspension diagram including the torque specs. If you are planning to replace the front shocks only, you can choose to raise just the front of the car and lay it down on jack stands. The same applies if you are planning to replace only the rear shocks. (Related Article: How to Jack Up Your Accord – Honda-Tech.com)

How do you change the fuel line on a Honda Accord?

Place the fluid catch pan under this area to catch any spilled gas. Once the nut is removed, pull the lower fuel line off and set it aside. Then, use the 17 mm flare nut wrench to loosen the Banjo bolt on upper fuel line. Rotate the wrench counterclockwise to loosen the bolt, and then remove the fuel line by hand.

Do you need to replace the fuel filter on a Honda Accord?

This article applies to the Honda Accord (1990-2002). For Honda owners who don’t perform regular maintenance, one of the items that eventually needs to be replaced is the fuel filter. But it’s not as bad as it sounds. If you are overdue for this task, you may notice that under tougher and steeper road conditions your Accord might feel sluggish.

Why is the belt on my Honda Accord whining?

Not replacing the belt can lead to serious damage to your motor. Often, the telltale sign that a belt is “going” is a noticeable screech or whining sound. It’s caused by the friction of the belt against the pulley.

How often should Honda Accord serpentine drive belt be replaced?

The serpentine drive belt should be replaced every 65,000-105,000 miles. Follow this video tutorial by YouTuber NutzAboutBolts to replace the belt yourself. Almost done!

Why is the alternator belt on my Honda Accord squeaking?

Many vehicles run several components of the motor through a system of belts and pulleys. All of those belts can wear over time, and should certainly be replaced per recommended maintenance intervals. Not replacing the belt can lead to serious damage to your motor.

How do you release tension on a Honda Accord?

To release the tension on the tensioner pulley, put a 14mm wrench onto the nut-head on the tensioner pulley (A), and pull the wrench toward the front of the car as shown. On the Honda Accord, this is a 14mm hex head on the tensioner pulley.

How to find a genuine Honda Accord drive belt?

Enter your VIN for the most accurate results. Enter your VIN for the most accurate results. We offer a full selection of genuine Honda Accord Drive Belts, engineered specifically to restore factory performance. Please narrow the Serpentine Belt results by selecting the vehicle.

Where is the number one piston on a Honda Accord?

5) Place the number one piston at the top dead center (PMS), which is the highest point on the cylinder that each piston reaches as it moves up and down during crankshaft rotation. To do this, turn the crankshaft with a socket and the ratchet attached to the threaded bolt on the front of the crankshaft.

How do you change the timing belt on a Honda Accord?

To do this, turn the crankshaft with a socket and the ratchet attached to the threaded bolt on the front of the crankshaft. Rotate until the TDC mark on the crankshaft pulley is aligned with the pointer on the lower cover timing belt. 6) Loosen the front right wheel nuts.

Navigation