How do you remove power antenna from Lexus LS400?

How do you remove power antenna from Lexus LS400?

4) Push on the tab in the pic while pulling down on the connector (not the wires!) to remove it. 5) Pull down on the black cable towards the top of the antenna assembly to disconnect it. Then remove the two 10mm bolts that hold the power antenna on.

What happens to the antenna on a Lexus?

If you don’t hear a noise after repeated tests then this tutorial is not for you. The antenna mast is driven by a plastic cable with small teeth on one side of it. What happens is that the antenna mast gets stuck/jammed, the teeth on the plastic cable wear out or strip, or the cable breaks apart.

What to do if your power antenna does not extend?

If your power antenna mast doesn’t extend and retract as it should or if it’s frozen in place all is NOT lost. Check to see if you hear a noise by the antenna, right after you turn on the radio. If you do that means the motor is still working and you can fix it…for about 20 bucks!

How to fix a power antenna on a car?

Check an auto parts store for one or order the Steck No. STC21600 (about $18) from amazon.com. Unscrew the bezel (Photo 1) and remove the antenna retaining bolts. If your power antenna is mounted inside the front fender, remove the wheel-well liner by pulling out the plastic rivets and push-in retainers.

4) Push on the tab in the pic while pulling down on the connector (not the wires!) to remove it. 5) Pull down on the black cable towards the top of the antenna assembly to disconnect it. Then remove the two 10mm bolts that hold the power antenna on.

If you don’t hear a noise after repeated tests then this tutorial is not for you. The antenna mast is driven by a plastic cable with small teeth on one side of it. What happens is that the antenna mast gets stuck/jammed, the teeth on the plastic cable wear out or strip, or the cable breaks apart.

If your power antenna mast doesn’t extend and retract as it should or if it’s frozen in place all is NOT lost. Check to see if you hear a noise by the antenna, right after you turn on the radio. If you do that means the motor is still working and you can fix it…for about 20 bucks!

Is there a problem with my Lexus LS 400?

P.S. also if anyone knows if the seats from a 1995 lexus ls 400 can be put into a 1994 along with the dashboard from the 95 it will be greatly appreciated. I have a 2004 LS430 with 80K miles. Recently a number of electrical functions stopped working . All are related to the left side of the car.

What’s the problem with my Lexus LS battery?

The problem is that every time i drive it somewhere and park it the battery dies. So i replaced the battery, i’ve done this multiple times, ive brought it to my dealer and they said there is an electrical drain from somewhere in the car.

Why does the left side of my Lexus LS not work?

Recently a number of electrical functions stopped working . All are related to the left side of the car. The Driver’s switches for RF,LR and RR windows do not work, but those windows all work from their respective local switch. The driver’s window works from the drivers’ window switch.

How much does it cost to fix electrical problems on a Lexus LS?

Dealer says these are unrelated. In any case they feel that there is an electrical drain somewhere and it will cost $ 1500 to diagnose. Not sure if it is worth it, because if I start the car once a day, then it is fine the next day.

Why is my power antenna not going up and down?

If your power radio antenna won’t go up and down anymore, the problem is either a burned-out motor or the geared cable inside the mast. Both are easy DIY fixes. You can do the entire repair in about two hours. The parts run about $25 for a new cable/mast, plus the cost of the special wrench.

How do you fix a stuck power antenna?

Fix a stuck power antenna by replacing a burned out motor or bad cable/mast. You can do both in about 2 hours, and you’ll avoid the $50 – $100 dealer service fee. You need only one special tool, an antenna wrench. Tilt the bottom of the antenna away from the fender and pull the unit down and out.