How do you remove EPs code from Honda Civic?
Here is a way to try to remove the code that is stored in the system. You can turn the steering wheel 45 degrees to the left from a straight position. Then turn the ignition to ON. The EPS light should come on for 4 seconds and then go off. Immediately, when the EPS light comes off, return to the straight position.
Why is the EPs light not on on my Honda Civic?
However, if there IS damage to the steering rack and pinion, there usually is an odd sound and rough steering a driver can hear and feel. This usually occurs when turning. If the car’s CPU can’t be activated when the EPS light comes on, the DTC is not memorized.
How do you reset the lights on a Honda?
Observe the instrument panel to make sure the warning light or lights have shut off. Press and hold the reset button, located under the odometer. Turn the ignition key to the “on” position while still depressing the reset button. Hold the button until the light turns off.
When to troubleshoot an EPS car engine problem?
When the engine speed is 285 rpm (min -1) or less, and the vehicle is traveling at a speed of 10 km/h (6.2 mph) or more for 3 seconds. To determine the actual cause of the problem, question the customer about the conditions during which the problem occured, taking the above conditions into consideration.
How do you reset EPs on Honda Civic?
Turn ignition switch OFF, and turn ignition switch ON. The EPS indicator comes on for about 6 seconds. Within 4 seconds of turning the switch ON, while the EPS indicator is on, turn the steering wheel 45° to left from straight ahead driving position, and hold steering wheel in position until EPS indicator goes off.
How long does EPs indicator last on Honda Civic?
The EPS indicator comes on for about 6 seconds. Within 4 seconds of turning the switch ON, while the EPS indicator is on, turn the steering wheel 45° to left from straight ahead driving position, and hold steering wheel in position until EPS indicator goes off. Turn ignition switch OFF after EPS indicator blinks twice. Remove jumper wire from DLC.
However, if there IS damage to the steering rack and pinion, there usually is an odd sound and rough steering a driver can hear and feel. This usually occurs when turning. If the car’s CPU can’t be activated when the EPS light comes on, the DTC is not memorized.
How to retrieve EPs DTCs Honda PGM tester?
How to Retrieve EPS DTCs Honda PGM Tester Method: 1. With the ignition switch OFF, connect the Honda PGM Tester (A) to the 16P Data Link Connector (DLC) (B) located under the dash on the driver’s side of the vehicle. 2. Turn the ignition ON (II), and follow the prompts on the PGM Tester to display the DTC(s) on the screen.