How do you remove disc brake from Honda Civic?
Use pliers to remove the retainer springs inside the drum brake assembly, and to safely unhook the emergency brake cable from the brake shoes. Once all the hardware is taken off, use a 12mm open-ended wrench to close the tangs at the end of the brake cable, and pull it from the drum assembly.
When to replace rear wheel bearing on Honda Civic?
This video outlines the procedure required to replace the rear wheel bearing and hub assembly on the 8th generation (2006-2011) Honda Civic equipped with drum brakes. The part number for this part is 42200-SNA-952 (LX and DX models).
Do you need rear disc conversion in Honda Civic?
Because of that, upgrading rear brake components is often overlooked. However, once your Honda Civic has some sticky tires and more power, it will need a rear disc conversion in order to help maintain safe stopping power.
How do you jack up a Honda Civic?
Break loose the lug nuts before you raise the car. (Related Article: How to Jack Up Your Civic – Honda-Tech.com) Use an 8 x 1.25mm bolt and thread it into the drum brake holes. This will lift the drum covers up to reveal the braking assembly. Then, use a flat head screwdriver to remove the dust cap.
How to replace rear wheel bearing hub assembly 06-12 Honda Civic?
How to Replace Rear Wheel Bearing Hub Assembly 06-12 Honda Civic – YouTube Buy Now!New Wheel Bearing & Hub Assembly from 1AAuto.com http://1aau.to/ia/1ASHS004621A Auto shows you how to repair, install, fix, change or replace a worn
Use pliers to remove the retainer springs inside the drum brake assembly, and to safely unhook the emergency brake cable from the brake shoes. Once all the hardware is taken off, use a 12mm open-ended wrench to close the tangs at the end of the brake cable, and pull it from the drum assembly.
Because of that, upgrading rear brake components is often overlooked. However, once your Honda Civic has some sticky tires and more power, it will need a rear disc conversion in order to help maintain safe stopping power.
Break loose the lug nuts before you raise the car. (Related Article: How to Jack Up Your Civic – Honda-Tech.com) Use an 8 x 1.25mm bolt and thread it into the drum brake holes. This will lift the drum covers up to reveal the braking assembly. Then, use a flat head screwdriver to remove the dust cap.
Where does the bleeding start on a Honda Civic?
Siphon old brake fluid from the brake fluid reservoir. Brake bleeding begins with the rear passenger side wheel, followed by the rear wheel on the driver’s side. Then, the front passenger side wheel and lastly the drivers side wheel. Remove the cap from the brake bleeder valve and loosen it with a box end wrench. Do not open it.
When to change brake fluid in Honda Civic?
Once you finish bleeding the brakes, refill the brake master cylinder reservoir with brake fluid. Always ensure the master cylinder reservoir has the brake fluid. Honda motoring experts advise that brake fluid should be changed or flushed after around 30,000 miles.
What’s the best way to remove a brake drum?
Use a screwdriver to attach the brake drum puller’s screw tightly. Tighten the screw until the brake drum puller is securely fastened around the brake drum. Do not over-tighten the screw on the brake drum puller. Knock the back of the brake drum lightly with a hammer. Tap the hammer against the brake drum with an outward motion.