How do you remove a Shimano cassette?
To remove the cassette, hold it from spinning using a chain whip. Insert the lockring tool (use the FR-5 series), and turn the tool counter-clockwise. The locking ring will unthread from the freehub and the cassette will lift upward. To install the cassette, lubricate the threads inside the cassette stack.
What tools do I need to remove a cassette?
In order to remove and replace your cassette, you need to unscrew this lockring. You’ll need three tools to do this: a chain whip, a cassette lockring remover and a large adjustable crescent wrench.
What’s the best tool to remove a cassette on a bike?
Always use a quick release skewer to hold the tool in place and snug to cogs when loosening. For solid axles, use the axle nut. Bike Cassette Removal Tool with Chain whip and Auxiliary Wrench Bicycle Sprocket Removal Tools Sprocket Remover …
How do you remove a cassette from a SRAM XD?
SRAM XD freehubs and sprockets are considered a cassette system. The lockring mechanism is hidden down inside the cassette stack. Inspect the inner perimiter of the smallest sprocket for 12 splines. Use the FR-5.2, FR-5.2GT, FR-5.2H, or FR-5.2G on this fitting. To remove the cassette, hold it from spinning using a chain whip.
Can a strap wrench be used to remove a cassette?
Second, it fit my 9-speed SRAM cassette on a 2007 Trek (Fuel EX7 WSD). And that about sums it up. I used a strap wrench to hold the cassette, which worked fine. This is a great tool for the job if the job is to remove a Cassette and not a Freewheel.
How does a cassette work on a park tool?
The freehub body has a series of splines on the outer shell. “Cassette” sprockets slide over these splines. A lockring threads into the freehub and holds the sprockets, or cogs, in place. When the cogs are removed, the ratcheting freehub remains on the hub body.