How do you remove a lock mechanism from a door?
Now, remove the two Torx bolts under the handle cover. Figure 1. Lock mechanism mounting screws. Carefully lever around the edge of the door trim, and lift it off. Pull up and forwards on the door trim to remove. Disconnect all hook linkage, and remove insulation in order to access actuator housing area.
How do you remove a door lock actuator?
Carefully lever around the edge of the door trim, and lift it off. Pull up and forwards on the door trim to remove. Disconnect all hook linkage, and remove insulation in order to access actuator housing area. (Related Article: How to Remove Door Trim Panel – MBWorld.org) Remove the T30 Torx screws holding the actuator.
What to do if your door lock cable breaks?
In some vehicles, the cable that connects the door lock actuator to the inner door handle may be built into the actuator assembly. If this cable breaks and it’s not sold separately, the whole door lock actuator may need to be replaced. Step 1: Inspect the affected door and lock. Locate the door with the damaged or broken door lock actuator.
Do you need to remove the cluster from a door lock?
If your vehicle has electronic door locks, you will need to remove the door lock cluster panel from the door panel as well. When removing the cluster panel, you need to remove the screws attaching it to the door panel.
In some vehicles, the cable that connects the door lock actuator to the inner door handle may be built into the actuator assembly. If this cable breaks and it’s not sold separately, the whole door lock actuator may need to be replaced. Step 1: Inspect the affected door and lock. Locate the door with the damaged or broken door lock actuator.
What are the clips on a door lock?
Package Quantity: 15. Also known as the door lock rod fastener, these linkage clips hold the lock rod in place so your door can be securely locked. These parts are vehicle-specific and AutoZone makes finding the right parts easy: simply enter your vehicle’s year, make, model, and engine above, and we’ll only show you parts that fit.
How do you replace a door lock cluster?
If your vehicle has electronic door locks, you will need to reinstall the door lock cluster panel into the door. Install the screws attaching the cluster to the panel, then make sure the cluster is connected to the wiring harness. You may have to attach the connectors under the door panel before you replace the door panel onto the door.
What to do if your door lock cylinder has failed?
Step 1: Locate the door with the faulty door lock cylinder. Visually inspect the damaged, stuck, or broken door lock cylinder for any exterior damage. Lift up on the door handle to see if there is any binding of the mechanism within the door. This confirms that the lock cylinder has failed and not the linkages inside the door.