How do you raise the seat on a Honda Fit?
To raise the seat, repeatedly pull up the lever on the outside of the seat cushion. To lower the seat, push the lever down repeatedly. Your vehicle is equipped with head restraints in all seating positions to help protect you and your passengers from whiplash and other injuries.
How do you remove the head rest on a Honda Fit?
Head restraints can be removed for cleaning or repair. To remove the head restraint: Pull the restraint up as far as it will go. Then push the release button, and pull the restraint up and out.
How do you adjust a Honda car seat?
Pull up or push down on the rear of the switch to move the rear of the seat bottom up or down. Pull the center of the horizontal switch up to raise the seat. Push it down to lower the seat. Adjust the seat-back angle by pushing the rear switch in the direction you want to move.
How do you unbolt the seat on a Honda Fit?
Unbolt the base of the seat from the floor of the Honda Fit using the 3/8-inch ratchet and socket. There are four bolts on each side, and you may need to slide the seat forward or backward to get access to the bolts. Lean the top of the seat forward so that you can access the wiring harness underneath the seat.
How do you install a child seat in a Honda Fit?
To deactivate the lockable retractor and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract. A child seat with a tether can be installed in any seating position in the back seat.
Do you reclining or reclining seat in Honda Fit?
The front seat passenger should also adjust their seat-back to a comfortable, upright position. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured.
What’s the best position to sit in a Honda Fit?
Adjust the seat-back to an upright position, and sit well back in the seat. Do not put a cushion, or other object, between the seat-back and your back. Doing so may interfere with proper seat belt or airbag operation.
Unbolt the base of the seat from the floor of the Honda Fit using the 3/8-inch ratchet and socket. There are four bolts on each side, and you may need to slide the seat forward or backward to get access to the bolts. Lean the top of the seat forward so that you can access the wiring harness underneath the seat.
The front seat passenger should also adjust their seat-back to a comfortable, upright position. Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant’s chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured.
Adjust the seat-back to an upright position, and sit well back in the seat. Do not put a cushion, or other object, between the seat-back and your back. Doing so may interfere with proper seat belt or airbag operation.
When to replace head restraints in Honda Fit?
Always replace the head restraints before driving. The driver’s and front passenger’s seats have active head restraints. In a rear impact, an occupant properly secured by a seat belt will be pushed against the seat-back and the head restraint will move forward.