How do you prepare the surface for por 15?
On Bare Or Rusted Metal Surfaces: Keep surface wet for 20 minutes, then rinse thoroughly with water. Remove excess from painted or chrome surfaces as quickly as possible to avoid discoloration. Surface must be bone dry prior to applying POR-15 Rust Preventive Coating. Do not store in metal containers.
Do you have to use metal prep before por 15?
Is it always necessary to apply Metal-Ready first before using POR-15 Rust Preventive Paint? No. Metal-Ready must be used first before applying POR-15 when 1. Painting on smooth, polished, or new metal surfaces.
What temperature do you apply POR15?
The POR 15 instructions say to apply the product in temps between 50 and 90.
How many coats of por 15 do I need?
Application Information states : under supplementary information and tips: – For two coat applications- apply second coat when first coat is tacky and almost dry.
Do you need to top coat POR-15?
No, but POR-15 has an ultra-violet sensitivity and must be topcoated if continually exposed to sunlight. Once topcoated, POR-15 will remain effective for many years.
Can I paint over metal prep?
To properly prepare new metal surfaces, use mineral spirits to remove grease and apply a rust-inhibitive primer before painting. For painted surfaces that are in sound condition, remove dust with a clean, dry cloth, de-gloss the surface with light sanding, and wipe with mineral spirits to ensure good adhesion.
Can I paint over Por15?
CAN I PAINT OVER POR-15 WITH OTHER PAINTS? Absolutely. POR-15 will accept all paints, including lacquer-based paints. POR-15 Tie-Coat Primer is the best prime coat to use before topcoating POR-15.
When can I put a second coat of POR-15?
Apply POR-15 in thin coats. For Two Coat Application: Apply second coat when first coat is tacky but almost dry. If first coat is fully cured, wet sand first coat with 600 grit sandpaper until gloss is dulled.
How long should por-15 dry before second coat?
Dry time: It cures to touch in 30-60 minutes. Second coat can be applied in 2-72 hours, depending on ambient temperature and humidity. POR-15 Top Coat can take 3-4 days to reach maximum hardness, and longer in temperatures below 55°F (15°C). Cleanup: Do not put leftover paint back into can.
Can you paint directly over por-15?
Can I paint over por-15?
Can you paint over por-15 with other paints?
CAN I PAINT OVER POR-15 WITH OTHER PAINTS? Absolutely. POR-15 will accept all paints, including lacquer-based paints. POR-15 Tie-Coat Primer is the best prime coat to use before topcoating POR-15. Be sure to read thoroughly our directions and tip sheets regarding topcoating before using POR-15. CAN I USE BODY FILLER OR PUTTY WITH POR-15? Yes.
What kind of heat resistant paint is por-15?
POR-15 High Temp Heat Resistant Paint POR-15 High Temp paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. It is also extremely weather, salt, and moisture resistant.
What should the temperature be to apply por-15?
POR-15 should be applied in temperatures of 50-90oF degrees (10-38oC) and humidity under 80% SUPPLEMENTARY INFORMATION & TIPS SEASONED OR RUSTED METAL: First, wire brush loose rust and scale. Then remove any grease or oil with POR-15 MARINE=CLEAN and prep with POR-15 METAL-READY.
How long does it take por-15 paint to dry?
HOW LONG DOES IT TAKE POR-15 TO DRY? That depends on the ambient humidity (surrounding area). The more humid the area, the faster the drying time, which usually varies from 2 to 5 hours. IS IT DANGEROUS TO GET POR-15 ON MY HANDS?