How do you flash the headlights on a Kia Rio?
To flash the headlights, pull the lever towards you. It will return to the normal (low-beam) position when released. The headlight switch does not need to be on to use this flashing feature. The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A).
How does the turn signal work on a Kia Rio?
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which turn signal is operating. They will self-cancel after a turn is completed.
What do you need to know about Kia Rio?
The ignition switch must be in the ON position to turn on the headlights When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle. Never place anything over sensor (1) located on the instrument panel.
When to use the hazard warning flasher on Kia Rio?
Only use the fog lights when visibility is poor. The hazard warning flasher should be used whenever you find it necessary to stop the car in a hazardous location. When you must make such an emergency stop, always pull off the road as far as po …
Where to change the light bulb on a Kia Rio?
Push the power plug straight on to the base of the new bulb. Replace the plastic dust cap by rotating it 1/4 turn in the clockwise direction. The Front Turn Signal light bulb is located at the inner corner of the headlight assembly.
Is there a free wiring diagram for a Kia?
Kia wiring diagrams free download for such models, as: Ceed, Picanto, Rio, Sedona, Sorento, Sportage, Venga and for other’s Kia models Kia Rio 2013 SX Wiring diagrams – Audio System 5 (Platform Audio).jpg
How to install a headlight cover on a Kia Rio?
Install the headlight bulb cover by turning it clockwise. If the headlight aiming adjustment is necessary after the headlight assembly is reinstalled, consult an authorized Kia dealer. Follow the steps 1 to 4 from the previous page.
What to do if your Kia light bulb does not work?
Push the socket into the assembly and turn the socket clockwise. If the light bulb does not operate, have the vehicle checked by an authorized Kia dealer. 1.Remove the under cover by rotating the screws.