How do you check the transmission fluid on a 1990 Toyota 4Runner?

How do you check the transmission fluid on a 1990 Toyota 4Runner?

the manual trans doesnt have a dipstick like an automatic does in order to check the level you have to locate the the trans under the 4runner take the fill nut out of the trans its about half way up the trans and put you finger in and you should be able to feel where the level is , it should be real close to the top .

How do I check my Toyota transmission fluid?

How to Check Automatic Transmission Fluids

  1. Pull out the dipstick. Put the car in Neutral or Park with the braking on, and keep the car running.
  2. Check the fluid. The transmission fluid on the dipstick should be bright red and almost clear.
  3. Wipe the dipstick with a clean rag, reinsert it, and pull it out again.

How is the fluid level checked in an automatic transmission?

Check the fluid. Dip the tip of your index finger into the fluid on the dipstick and rub the fluid between your finger and the tip of your thumb. The transmission fluid on the dipstick should be pinkish and almost clear. If it looks or smells burnt or has particles in it, have a mechanic drain and change the fluid.

Do you check Toyota transmission fluid with the car running?

Leave the engine running for about 5 to 10 minutes before you pull out the transmission fluid dipstick. While checking the transmission fluid, be sure to keep the engine running for a more accurate reading. Once the vehicle is securely parked, open the hood and locate your transmission fluid dipstick.

How do you check the transmission fluid on a Toyota 4Runner?

Check the Transmission Fluid on a Toyota 4-Runner

  1. Crank the 4Runner up and let it warm up briefly.
  2. Open the hood.
  3. Pull the dipstick out of the tube.
  4. Locate where the fluid ends on the dipstick.
  5. Sit in the vehicle and place the truck in gear.
  6. Check the fluid level again, making sure the level is still full.

What kind of transmission fluid does a 2000 Toyota 4Runner take?

Dexron™ VI Automatic
Toyota 4Runner 2.7L / 3.4L Automatic Transmission 2000, Professional™ Full Synthetic Dexron™ VI Automatic Transmission Fluid by ACDelco®.

Do you have to change the transmission fluid on a Toyota 4Runner?

Replacing the transmission fluid is very important as your Toyota 4Runner gets up there with mileage. Learn how to do it here. This article applies to the Toyota 4Runner (1996-2002). The Toyota 4Runner doesn’t ask for much. In fact, it doesn’t even ask you to change the transmission fluid that regularly.

What kind of fluid does a Toyota automatic transmission use?

Information about type and capacity fluid are for reference only. Reference book «Fluid type : automatic transmission Toyota». Full capacity l. Service fill l.

How long does it take to change the transmission fluid?

This will take you about 20 minutes to do the fluid drain/fill. The synthetic fluids do break down over time just as any other fluid. Toyota wants to sell you a new transmission when your vehicle is out of warranty. That is what they are really telling you. Change your fluid.

Where is the drain plug on a Toyota 4Runner?

This model 4Runner is much simpler than most. There is one bolt on the bottom of the transmission’s pan, and that is the drain plug. Place the drain pan underneath it, then slowly loosen it to drain the transmission. Wait until the transmission is fully drained, then tighten it back on. Figure 1. Transmission’s drain plug.