How do you check the transmission fluid in a 2004 Oldsmobile Alero?
Open the hood and prop it up with the safety bar. Locate the transmission fluid dipstick. The dipstick is located near the rear of the engine and is labeled “ATF Engine Oil.” Twist off the cap and wipe the dipstick with a clean paper towel. Check to see what color the fluid is.
How do you check the transmission fluid in a Oldsmobile Alero?
Run the Alero’s engine and shift it into each gear while driving it for approximately 5 minutes. This ensures that the transmission fluid is running through the system and not sitting stagnant, in order to produce a more accurate level reading.
How much oil does a 2003 Oldsmobile Alero take?
5.1 quarts
Capacity: 5.1 quarts (with filter)After refill check oil level.
How much oil does a 2004 Oldsmobile Alero take?
4 quarts
Capacity: 4 quarts (with filter)After refill check oil level.
How many quarts of oil does an Oldsmobile Alero take?
Engine Oil 4 quarts (with filter)After refill check oil level.
How do you reset the change oil light on a 2003 Oldsmobile Alero?
1999-2003
- Remove the instrument panel fuse box cover.
- With the ignition switch in the ON position, depress the OIL RESET button until the Change Oil light starts to flash.
- Release the button, then press and hold the button again until you hear the chimes sound and the Oil Change light goes off.
How often should I change the transmission fluid in my Oldsmobile Alero?
Check your 2003 Oldsmobile Alero’s transmission fluid periodically to be sure that fluid is running through the system properly. Change the transmission fluid periodically, approximately every 40,000 miles.
Where is the transmission check plug on an Alero?
Locate the transmission check plug on the side of the transmission pan in the center front end of the car. Unbolt the cap on your check plug, using the socket wrench. Press the Alero’s emergency brake completely to the floor so that the car will not roll off the jack stands when you take it out of gear. Shift the gear stick to “neutral.”
How long do you run the Alero engine?
Run the Alero’s engine and shift it into each gear while driving it for approximately 5 minutes. This ensures that the transmission fluid is running through the system and not sitting stagnant, in order to produce a more accurate level reading. Turn the engine off and remove the key as a safety precaution.
When was the last Oldsmobile Alero made?
The Oldsmobile Alero was manufactured in Lansing, Michigan between 1999 and 2004. It was the company’s last compact car produced. One complaint repeated about the car is that it’s difficult to fill with transmission fluid. However, filling the car’s transmission fluid is a relatively simple task once you find the fill cap.