How do you change the drum brakes on a Honda Civic?
Engage the emergency brake and shift the car into “Park” if it’s an automatic or in second gear if it’s a stick shift. Loosen the lug nuts on the rear wheels but do not remove them. Raise the rear of the Civic with a jack and place jack stands underneath the outer frame.
What kind of brakes does a Honda Civic have?
One of the most vital systems on your Civic is its brakes. Failure to maintain the brakes on your Civic can greatly impact your safety as well as others on the road. Like many cars, the brakes used on the Civic’s rear wheels are drum brakes.
How do you stop brake bleed on Honda Civic?
Figure 1. Siphon old brake fluid from the brake fluid reservoir. Brake bleeding begins with the rear passenger side wheel, followed by the rear wheel on the driver’s side. Then, the front passenger side wheel and lastly the drivers side wheel. Remove the cap from the brake bleeder valve and loosen it with a box end wrench. Do not open it.
Where does the bleeding start on a Honda Civic?
Siphon old brake fluid from the brake fluid reservoir. Brake bleeding begins with the rear passenger side wheel, followed by the rear wheel on the driver’s side. Then, the front passenger side wheel and lastly the drivers side wheel. Remove the cap from the brake bleeder valve and loosen it with a box end wrench. Do not open it.
How do you remove disc brake from Honda Civic?
Use pliers to remove the retainer springs inside the drum brake assembly, and to safely unhook the emergency brake cable from the brake shoes. Once all the hardware is taken off, use a 12mm open-ended wrench to close the tangs at the end of the brake cable, and pull it from the drum assembly.
How do you jack up a Honda Civic?
Break loose the lug nuts before you raise the car. (Related Article: How to Jack Up Your Civic – Honda-Tech.com) Use an 8 x 1.25mm bolt and thread it into the drum brake holes. This will lift the drum covers up to reveal the braking assembly. Then, use a flat head screwdriver to remove the dust cap.
Do you need rear disc conversion in Honda Civic?
Because of that, upgrading rear brake components is often overlooked. However, once your Honda Civic has some sticky tires and more power, it will need a rear disc conversion in order to help maintain safe stopping power.
Which is better disc brakes or drum brakes?
Drum brakes are quickly becoming a thing of the past. Disc brakes offer better stopping performance for your car. This article will explain how to use a conversion kit to upgrade from drums to rear disc brakes. This article applies to the Honda Civic/Del Sol (1992-2000).
How do I adjust the drum brake on my car?
To confirm your brakes are in good working order before you adjust them, check your vehicle for symptoms of a bad or failing drum brake. This article covers the adjustment process for drum brakes of the star wheel type. Step 1: Lift the rear end of the vehicle. Make sure the vehicle is in park and that the parking brake is set.
How to convert rear drum brake to ex disc brake?
1. Pull the parking brake lever 1 click. 2. Tighten the parking brake adjusting nut until the parking brakes drag slightly when the rear wheels are turned. 3. Release the parking brake lever fully. 4. Check that the parking brakes do not drag when the rear wheels are turned. 5. Readjust if necessary. 6.
Engage the emergency brake and shift the car into “Park” if it’s an automatic or in second gear if it’s a stick shift. Loosen the lug nuts on the rear wheels but do not remove them. Raise the rear of the Civic with a jack and place jack stands underneath the outer frame.
One of the most vital systems on your Civic is its brakes. Failure to maintain the brakes on your Civic can greatly impact your safety as well as others on the road. Like many cars, the brakes used on the Civic’s rear wheels are drum brakes.
What’s the best way to replace a drum brake?
Remove the spring and immediately hook it onto the new shoes exactly as you removed it. Inspect the brake wheel cylinder for any signs of leakage and replace if needed. Rebuild the new brake. The brake backing plates should be cleaned and lubed with a small amount of anti-seize on the slide points and anchor points.
How do you remove the drum from a car?
Grab the brake drum by the edges and pull it off. It may help to wiggle it a bit as you pull. It may be necessary to back off the brake adjuster to remove the drum. This is done through the brake adjustment hole in the drum or on the backing plate using a brake adjuster tool to turn the adjuster to loosen the brakes enough to remove the drum.