How do you change the coolant temperature?
Let’s Get Started
- Release the Cooling System Pressure. Locate and slowly remove the cooling system pressure cap to relieve the system of any residual pressure.
- Locate the Coolant Sensor.
- Remove the Electrical Connector.
- Remove the Coolant Sensor.
- Install the New Coolant Temperature Sensor.
- Refill the Cooling System.
Where is the coolant temperature switch?
Usually, the location of the coolant temperature sensor will be located directly behind the coolant pipe. In most modern cars and vehicles, this is present behind the right cylinder head that is located right underneath of the air intake pipe.
When should I change my coolant temperature sensor?
Often, the engine coolant temperature sensor must be replaced at about 100,000 miles. If you don’t properly maintain the engine cooling system, the sensor could fail much earlier.
What should the temp of the coolant sensor be?
Check that the temperature value of the CTS is around 80-90c when the engine is hot. A lot of engine coolant temperature sensors have two wires and the sensor is controlled by Ohm. Get a wiring diagram and find out what ohms you should have at a specific temperature to check the function.
How can I check the coolant level in my car?
Step 1: Start the vehicle. Let it warm up to operating temperature. Step 2: Check for leaks. Be sure to check for leaks from the radiator drain plug, petcock, or the coolant temperature sensor. Step 3: Check to see if the check engine or low coolant level light is illuminated.
What to do when your coolant sensor is replaced?
Properly dispose of used coolant. Step 16: Lower vehicle from jack stands. Place the vehicle back level to the ground. Once the coolant temperature sensor has been replaced, you need to start the engine, check for leaks, and refill the radiator fluid in most cases before you test drive the vehicle.
Can you change the coolant in a radiator?
Although you may have collected the radiator coolant when you drained it from the radiator, it is highly recommended that you add new coolant. This will ensure that the coolant temperature sensor will work correctly. Add new coolant, mixed with distilled water as recommended by your specific vehicle manufacturer.