How do you change oil on a Polaris Sportsman 500?
Warm up oil, drain from oil tank, replace bolt. Start engine for ONLY 10 seconds, shut down, remove oil tank drain bolt again allowing to drain and replace oil filter then drain bolt. Got this idea from OPT (an old polaris tech on ATVConnection) that got it from a Polo engineer.
When to change your Polaris ATV’s oil?
The recommended engine oil and filter changes for your Polaris ATV can be found listed below and in the Periodic Maintenance Chart of your Owner’s Manual. Perform a break-in oil and filter change at 25 engine hours or one month of use — whichever comes first. Following break-in, change your oil and filter every 100 hours, six months or 1,000 …
What kind of maintenance does a Polaris Sportsman 500 need?
With the extreme demands placed on a Polaris Sportsman 500 All-Terrain Vehicle, regular maintenance becomes a critical factor in its continued operation. One of the maintenance routines required by the machine is the replacement of the oil that lubricates the moving components within the engine.
How to change Polaris Sportsman transmission and diff?
Step 2. Get a drain pan to catch the fluid, and remove the 8mm Allen drain bolt located underneath the front differential. Check the fluid to make sure it’s not milky, which is an indication of water in the transmission. Once the fluid has completely drained, replace the drain bolt. Step 3.
How often do you change the oil on a Polaris Sportsman 500?
One of the maintenance routines required by the machine is the replacement of the oil that lubricates the moving components within the engine. Polaris recommends an oil change every ten hours of continuous operation, but this maintenance task may be performed at shorter intervals.
What kind of oil to use on a sportsman 500?
Basically any synthetic 0W-40, 5W-40 or 5W-50 will work great. Mobil1 0w-40 synthetic and a NAPA gold filter.Good stuff and way cheaper.Thats all I’ve ever used. Never bought a drop of the Polaris oil. The filter number for my 07 700efi is 1357 but it might be different on your 500. They can look it up for you. Wow thank you for the fast replies!
What kind of oil to use on Polaris ATV?
Polaris ATVs have separate oils for the engine and transmission and do not have a wet clutch, so automotive oils that contain friction modifiers can be used. Synthetic automotive oil is fine for your machine. Just use the right weight. 0W-40, 5W-40, 5W-50 will all work.
How to change oil level in Polaris engine?
To drain, remove drain plug found on lower right side of crankcase. NOTE: The sealing surfaces on the drain plug and crankcase should be clean and free of burrs, nicks or scratches. 20. Reinstall drain plug and torque to specification. 21. Remove dipstick and fill tank with 2 quarts (1.9 L) of Polaris Premium 4 Synthetic Oil. 22.