How do you bypass the solenoid on a Yamaha golf cart?
Put the golf cart in the forward drive position, turn the key to the on position, and depress the accelerator pedal. As before, you want to listen out for the click. When you hear this, set the multimeter to DC Volts in the 200 scale and test the terminals again. Place the probes on the terminal.
Will a bad voltage regulator keep a golf cart from starting?
Having a faulty voltage regulator can lead to other problems as well, such as overcharge causing electrical components to burn out or inability of the golf cart battery to retain a charge. From my own experience, you should replace your voltage regulator as soon as possible!
How do you test a voltage regulator on a golf cart?
Once the new voltage regulator is installed, it is time to test whether it is running correctly. Use a voltmeter and connect it to the terminals of the battery. The reading should be 12.6 volts, provided that there is no spin. Then, press the acceleration pedal on the golf cart.
Why does my Yamaha golf cart not spin?
The absence of a spin in this test could mean your Yamaha golf cart’s battery pack is failing. The controller is one major component that may have to be replaced. A faulty controller can stall the cart and the click you hear must be from the solenoid. Test the solenoid to see if it is functioning properly.
What are the symptoms of a bad solenoid on a golf cart?
On an electric golf cart, the most common symptom is the solenoid is not delivering electricity to the controller when the vehicle’s ignition is turned on. In normal operating conditions, the solenoid clicks on and off with the ignition switch. A failing solenoid will generally not click.
Do you need to replace solenoid on G9 Yamaha golf cart?
If you have decided to replace the batteries, then Group 24 battery is recommended for the G9 Yamaha golf carts. The solenoid can be checked using an old screwdriver to jump the terminals. Your G9 Yamaha golf cart’s key must be in the start position. If the starter turns when you do this, your solenoid needs to be replaced.
When to replace solenoid on electric golf cart?
If you get a clicking sound, look for a reading of less than 0.4 ohms. If the reading is higher, the solenoid is not working and needs to be replaced. On an electric golf cart, if the solenoid is silent – no clicking – use the setting voltmeter to DC volts using the 200 range.
How do you test a solenoid on a golf cart?
Set your voltmeter to measure ohms, and place a probe on each large terminal (see image below). You should have a reading of 0 to 0.4 ohms. Anything higher, and it means that the solenoid has faulty contacts and should be replaced.
Why is my golf cart not charging?
The three most common causes of problems with a golf cart battery charger have to do with the timer units, diodes and bad DC plugs. If you think you may be having trouble with your deep cycle battery charger, you can bring it in to your local golf cart shop and have it tested.
What is a solenoid in a golf cart?
A golf cart solenoid is a relay, a remote-controlled high-amperage relay designed to protect the delicate contacts in key switches, buttons, etc. from the high-temperature arc of electricity. A golf cart solenoid provides forward and reverse functions in some golf carts.