How do you attach a harness to a Chevy Silverado?
Slide the end with no connector through the routing passage (from the inside of the mirror housing) and through the hole in the rubber insulation. Attach the rubber insulation to the mirror mounting frame. Pull the harness through leaving about 6 inches of slack in the harness near the motor pack.
Where is the turn wire on a Chevy Silverado?
Locate the Dark Blue wireand activate the passenger side turn indicator. Probe the Dark Blue wireto verify that flashing turn indicator power is present. Deactivate the turn indicator and depress the brake to make sure you have not located the rear turn wire. Label that wire as front, PASSENGER SIDE TURN.
What are the colors of a Chevy Tahoe?
At amplifier color codes are as follows. +12V Constant= Orange +12V Accessory Switched = Green (Only when factory radio is plugged in) -12V Chassis Ground = Black +12V Illumination =Gray +12V Dimmer =Gray LF+ = Tan LF- = Gray RF+ = Lt Green RF- = Dk Green LR+ = Brown LR- = Yellow RR+ = Dk Blue RR- = Lt Blue Sub+ = Green/Black Sub- = Blue/White 156
Where is the motor mount on a Chevy Silverado?
Align the motor mount with the motor actuator. Place the palm of your hand on the center of the glass and press firmly until you hear the snaps engage onto the motor puck. Press on the top, bottom and both sides of the mirror to ensure complete attachment to the motor puck.
What kind of wiring do I need for my Chevy Tahoe?
Need AC Wiring Diagram for 2003 Chevy Tahoe Compressor not cycling. Has refrigerant. Need to troubleshoot the control circuitry. have the same problem? At the compressor relay, terminal 30 is hot/voltage all the time. Terminal 86 goes hot with the key on. Terminal 85 is ground for the coil side of relay, controlled by the pcm.
How to hot wire a Silverado Tahoe power seat?
HOW TO HOT WIRE A POWER SEAT – Silverado Tahoe Suburban 1999-2006 – junk yard removal the EASY WAY! – YouTube HOW TO HOT WIRE A POWER SEAT – Silverado Tahoe Suburban 1999-2006 – junk yard removal the EASY WAY!
At amplifier color codes are as follows. +12V Constant= Orange +12V Accessory Switched = Green (Only when factory radio is plugged in) -12V Chassis Ground = Black +12V Illumination =Gray +12V Dimmer =Gray LF+ = Tan LF- = Gray RF+ = Lt Green RF- = Dk Green LR+ = Brown LR- = Yellow RR+ = Dk Blue RR- = Lt Blue Sub+ = Green/Black Sub- = Blue/White 156
How to remove plastic trim from Chevy Tahoe?
1. Use panel removal tool to remove plastic triangle. 2. Use panel removal tool to remove plastic trim bezel around door opener handle. 3. Use panel removal tool and remove window control panel, Disconnect and remove. Extract (1) 9/32″ screw from behind. 4. Extract (1) 9/32″ from behind door handle. 5.