How do I turn off the service light on my Audi a4?
Start with the ignition turned OFF Press and hold the button on the right side of the display while turning the ignition on (position 2). Service OEL / OIL, should be displayed. Release the button on the right Pull out the button on the left side of the display until the service prompt is cleared.
How do I reset my Audi service reminder?
Step 1: Let’s Do It!
- Put key into ignition.
- Press and hold trip reset button on the instrument cluster.
- Turn key to II position.
- Release the button.
- Turn the clock adjustment button on the instrument cluster clockwise.
- On the LCD screen you should now see “SERVICE IN 15000KM” message on with red backlight.
How do I turn off the service light on my Audi?
Step 1 – Press “Trip Reset” button and start engine
- Pull the knob located on the right-hand side of the instrument cluster (trip reset button).
- Release the knob.
- Rotate the left-hand knob one full turn.
- Check the display for the following message, “Service In — Miles — Days — or Service!”
- Pull the knob once more.
When to reset service light indicator Audi A4?
Reset service light indicator Audi A4, from years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001. If the service is due on these vehicles, when the key is turned to position 2 one of the dashboard displays will show. Service INSP, INSP1 or INSP2 for Fixed interval services. And, SERVICE OEL or OIL, for the Oil Service interval.
How do you reset service oil on Audi A4?
STEP 1: Switch ignition off. STEP 2: Press odometer and instrument cluster reset buttons while switching ignition on. Trip recorder display (3) will read “ service OIL “. STEP 3. Release buttons.
When to do function test on Audi A4?
A function test can be performed with the engine idling or when vehicle speed has reached at least 3 MPH. If there is a priority 1 malfunction (Red symbol), distance remaining will not display. Distance remaining will be updated every 310 miles.
How to reset service due interval 2008-2020?
Ensure ignition is off. Press in the wrench button on instrument cluster, and at the same time rotate the ignition key forward (without starting). While still pressing the “ WRENCH ” button in, press the “0,0” BUTTON and HOLD until the “SERVICE!” notification clears (about 2 – 3 seconds).