How do I turn off the maintenance light in my Honda Accord?
Reset oil service light Honda Accord
- With Reset Button on Instrument Panel.
- Turn the ignition off.
- Press the select switch and reset switch at the same time, turn the ignition switch to run, one position before starting.
- Hold them for at least 10 seconds, until the indicator resets.
- With Key Slot on Instrument Panel.
How to turn off the maintenance required light on vehicles?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due. Put the key in the ignition. Press and hold the odometer reset knob.
How to reset the Toyota maintenance required light?
Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.
How to turn off the maintenance required light on Honda Civic?
How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.
Why is my ” maintenance required ” light flashing on and off?
The maintenance required light may being flashing 500 miles before your car is due for service. The “maintenance required” light is not to be confused with the “check engine” light. The picture at the top of this article shows your standard “maintenance required” light; the pictures below show standard “check engine” lights.
How do you reset the maintenance required light?
Turn of Maintenance Required Light. Here’s what to do: With the car off and key out, hold in the odometer select/reset button. Insert the key and turn to the run position without starting the car. Keep holding the button in. The Maintenance Required Light will blink once and then in another 5-10 seconds.
How do I Turn Off the maintenance required light on my Honda?
How to Turn Off the Maintenance Required Light on a Honda Civic. Put the key in the ignition. Press and hold the odometer reset knob. This is the knob that sticks out on the bottom right of the instrument cluster. While holding this button, turn the key to the “On” position, but do not start the engine.
How do I Turn Off the change oil light?
You need to reset your change oil warning light. To do this, turn the ignition key to on but do not turn over the engine. Then rapidly push down the gas pedal three times. This will reset the system and turn off the blinking light.
What does the maintenance required light mean?
The maintenance required light just means that some sort of scheduled maintenance needs to be done. Most of the time it just means you need an oil/filter change. Your owner’s manual will list what maintenance is required based on your milage.