How do I setup my first data configuration FD130?

How do I setup my first data configuration FD130?

Connect the Terminal

1. Remove the cover from the bottom of the terminal.
2. Plug an ethernet cable (sold separately) into the yellow port, OR plug the included phone cable into the blue port.
3. Plug the other end of the ethernet cable into a numbered port on the router.
4. (Optional) Connect a PIN pad to the terminal.

How do I connect my FD130 to WIFI?

First Data FD130 – How To Connect To WIFI

1. Press CLEAR to return back to HOME screen.
2. Press ORANGE WRENCH/HAMMER (Upper Right Corner)
3. Press WIFI.
4. Press SECURITY.
5. Enter PASSWORD.
6. At this point, you will choose your security type.
7. Enter your key.
8. Enter your SSID network.

How do I enable IP on FD130?

Tap Set IP Address To enter a period press the Alpha button three times, then press 0. To tab between lines, press Enter (green button) and 9 at the same time.

Is First Data PCI compliance?

First Data Advantages With our PCI Rapid Comply solution, your merchants don’t have to be security experts to become and remain PCI DSS compliant. You can offer your merchants an online solution, designed by PCI security experts specifically for small to medium size merchants.

How do you ping FD130?

How can I test my FD100/130/200 terminal’s network connection?

1. Select TOOLS.
2. Tap LAN.
3. Tap Ping.
4. Enter a known IP address to ping if one is not already listed.
5. Press Enter (Green button).
6. To return to the home screen, press Clear (red button) three times.

How do I change batch time on FD130?

US Terminals

1. Press # , enter password.
2. Press 3 Setup.
3. Press 5 Transoptions.
4. Press 4 for Settlement.
5. Press 6 for Auto Time.
6. Enter the time (24-hour clock format) and press OK.
7. Press the red X until you are back at the main screen.

How do I turn off my first data machine?

To switch the terminal off, hold down the red X key until you are prompted with the power off option on the screen.

What happens if you don’t batch out?

So – what happens if you don’t settle out on a daily basis, or on a day where you had authorizations? The answer is that you risk getting a “downgraded” interchange rate – essentially, you’ll pay more for the sale!

How do you make a lowercase letter on fd130?

To change between lowercase and uppercase letters on your FD100/130/200 terminal, hold Enter (green button) and press ALPHA.

How many First Data fd130 manuals are there?

Database contains 11 First Data FD130 Manuals (available for free online viewing or downloading in PDF): Getting started manual, Quick reference manual, Quick setup manual .

How do you enter numbers on the fd130?

The FD130 has 15 keys that can be used toselect numbers, letters, and to enter data. To enter numbers or letters, simply press the appropriate key. For example, to type the letter A, press [ALPHA]; then the number 2 key. For the second letter on the keyboard, such as B, press [ALPHA] twice then. Or for C press [ALPHA] three times then.

How long does it take to set up a fd130 terminal?

Typical set-up time: 10-15 minutes Where to put the FD130 Terminal Place the terminal on a desk or tabletop. Avoid areas with direct sunlight, objects that radiate heat, excessive dust and other electrical devices that can cause excessive voltage. Loading the paper Pop the printer cover’s latch to open the cover; then lift the cover.

Where do you insert a smart card on a first data fd130?

(Optional: Smart card capability must be enabled. Contact your sales or customer service representative.) Find the card reader slot at the front of the FD130 and insert the card completely so the microprocessor chip is no longer visible and the front of the card is facing up. The card must remain inserted throughout the entire transaction.