How do I set up my TSC printer?

How do I set up my TSC printer?

Setup

1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then plug the power cord into a properly grounded power outlet.

Why is my thermal printer blinking red?

Most of the time, the flashing red light indicates that you are running low on paper. If the paper is not running low, make sure that the roll is pushed all the way to the back of the printer.

How do I fix my TSC printer?

Cause: The software’s printing program has an error. Solution: Restart the print program, re-create a new label, and re-type the contents of the label, select the correct print driver to print to see if it is normal. If it is still the same, you can only uninstall the software and then reinstall it.

How do I setup a TSC printer on a Mac?

Guide to setup TSC printers on Apple Macintosh Mac Os Snap Hardware white page

1. Double click on file and select Continue and Install from following Form.
2. Insert administrator’s username and password (in the example we are using an user named TSC)
3. A new Dialog will show thath installation is done.

How do I connect my printer to my bartender?

Instructions

1. Accept the license agreement.
2. Determine Installation Directory (default is recommended)
3. Confirm UAC Screen.
4. Seagull Driver Wizards screen appears, select “Install printer drivers” radio button.
5. Select the proper connection type in the Connect Printer screen.

Why is my Kodak printer blinking red?

The battery LED indicator will blink red until the battery is fully charged. – Your KODAK PRINTOMATIC may take up to 2 hours to fully charge. – When the battery power dips below 10%, the battery LED indicator will glow red and the camera will not print. At 2% power, your camera will automatically shut off.

How do I reset my Munbyn label printer?

Turn on the printer; Press FEED button and hold on; Release your finger when you hear one “Di” sound. Then, the printer will “know” the label size and will not print blank label or incompletely.

How do I check the barcode on my printer?

To test bar code printing, do the following:

1. Choose Spool Administration (transaction SPAD) and then Utilities For device types Test data (SAPscript) .
2. Print the predefined document SAPSCRIPT-BARCODETEST, specifying ST as the document ID and EN or DE as the language.

How do I connect my Mac to label maker?

Open System Preferences on your Mac and choose Printers & Scanners. Click the + sign under the list of printers. Click Add Printer, if prompted. Select your DYMO LabelWriter from the list of printers in the Add pop-up screen.

How do I install label printing on a Mac?

Installing the printer:

1. Attach the printer to your Mac.
2. Click the Apple menu, then click System Preferences. Depending on your version of OS X, click Print & Fax, Print & Scan, or Printers & Scanners.
3. Click the + button.
4. Choose the model of your printer from the list.
5. Click the Add button.
6. Done!